Sign Regulations in Puyallup, WA (2026)
3 verified sign regulations for Puyallup, Washington, sourced directly from the municipal code and official government pages.
Verified from official government sources
Political Signs
Puyallup treats political signs as freestanding temporary signs under Puyallup Municipal Code § 20.60.070: they are allowed in any zone without a permit, capped at eight square feet and 42 inches tall. Placing one in the parking or planting strip between the sidewalk and the street requires the abutting property owner's written permission first.
Puyallup Political Sign Placement Rules
Some RestrictionsPuyallup Municipal Code § 20.60.070(1)(a)-(c)
Freestanding temporary signs, including sandwich board signs, shall be allowed on property outside of the ROW subject to the following standards: ... Freestanding temporary signs shall be permitted in all zones. ... Freestanding temporary signs shall not exceed eight square feet in area and shall not exceed three and one-half feet (42 inches) in height. ... If a political sign is placed in a pa...
Digital Billboards
Puyallup bans true billboards outright and instead regulates on-premise digital signs tightly. Electronic message signs cannot blink or change images faster than once every two seconds, cannot display video or animation under any circumstance, must carry automatic dimming capped at 0.3 foot-candles above ambient light with 5,000-nit daytime and 500-nit nighttime ceilings, and must shut off from 11 p.m. to 6 a.m. near residential zones under PMC § 20.60.065(3).
Puyallup Electronic Message Sign Rules
Significant RestrictionsPuyallup Municipal Code § 20.60.065(3)
Table 20.60.065(3): Standards for Electronic Message Signs The following performance standards shall apply to all electronic message signs: Standard Description (a) Message Frequency Messages shall not blink or flash or change their message more frequently than once every two seconds. ... (c) Brightness Level Max 0.3 foot-candles above ambient light levels. ... Signs shall also be preset to pre...
Window Signs
Window signs in Puyallup need no sign permit as long as they, alone or combined, cover no more than 25 percent of a building facade under PMC § 20.60.015(3). Cross that threshold and the entire display is reclassified as a facade sign, requiring a permit and full compliance with facade sign standards.
Puyallup Window Sign Coverage Limit
Some RestrictionsPuyallup Municipal Code § 20.60.015(3)
(3) Any window sign; provided, that no individual sign or combination of signs shall exceed 25 percent coverage of each facade. Furthermore: (a) If the area of window signs, as allowed under this section, does not exceed 25 percent of window coverage per facade then the window sign area shall not count towards the total allowable sign area permitted for a particular property; and (b) If a windo...
Looking for Pierce County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Puyallup city rules.
Sign Regulations in Pierce County →