Tree Protection in Ridgewood, NJ (2026)
2 verified tree protection rules for Ridgewood, New Jersey, sourced directly from the municipal code and official government pages.
Verified from official government sources
Heritage & Protected Trees
The Village of Ridgewood, Bergen County, New Jersey has no separate landmark or heritage-tree label. Instead, Village Code Chapter 260 protects every non-invasive "qualified tree" of eight inches DBH or greater on private land, requiring a permit before it can be cut down.
Ridgewood Qualified Tree Removal Permit Rule
Some RestrictionsVillage of Ridgewood Code §§ 260-2, 260-4
QUALIFIED TREE Any non-invasive species tree with a diameter measured at breast height (DBH) of eight inches or greater, on any lands within the Village of Ridgewood. ... § 260-4. Cutting or removal of a tree. A. No person, property owner, hired firm, or other entity shall cause to be cut or removed any existing qualified tree, with a diameter at breast height (DBH) eight inches or greater, upo...
Parkway Planting
Village of Ridgewood Code § 190-84 sets fixed placement standards for street trees: both sides of the right-of-way, no more than 50 feet apart, minimum 1 3/4 to 2 inch trunk caliper, and six feet of clearance to the lowest branches at planting.
Ridgewood, NJ Street Tree Spacing and Caliper Rules
Some RestrictionsVillage of Ridgewood Code § 190-84
§ 190-84. Street trees. The following standards shall apply to the placement of street trees: ... Street trees shall be placed on both sides of the street within the right-of-way and spaced not more than 50 feet apart. ... All street trees shall have a minimum trunk caliper of 1 3/4 to two inches at the time of installation. ... Street trees shall be trimmed so that the lowest branches will be ...
Looking for Bergen County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Ridgewood city rules.
Tree Protection in Bergen County →