Outdoor Lighting in Wyoming, MI (2026)
3 verified outdoor lighting rules for Wyoming, Michigan, sourced directly from the municipal code and official government pages.
Verified from official government sources
Dark Sky Rules
Within Wyoming, Michigan's Form-Based Code corridor areas, exterior site lighting other than flag or decorative lighting must be shielded, hooded or louvered so no light source is visible past the property line. Fixtures need a full 100 percent horizontal cutoff, and no pole or fixture can exceed 25 feet above average grade.
Wyoming, MI Outdoor Lighting Shielding Rule
Some RestrictionsWyoming Zoning Ordinance (Ch. 90) § 90-1311(a)(1),(3) (Form Based Code, Div. 3)
Sec. 90-1311. - Lighting. (a)Exterior site lighting, other than flag and decorative lighting, shall be confined to the development site and conform to the following:(1)Lamps and luminaries shall be shielded, hooded and/or louvered to provide a glare free area beyond the property line and beyond any public right-of-way, and the light source are not directly visible from beyond the boundary of th...
Light Trespass & Shielding
In Wyoming, Michigan's Form-Based Code corridor areas, exterior site lighting cannot exceed one foot-candle of intensity at any property line. The numeric cap in Sec. 90-1311(a)(2) works alongside the same section's shielding and full-cutoff fixture requirements to keep glare off neighboring properties.
Wyoming, MI One Foot-Candle Trespass Cap
Some RestrictionsWyoming Zoning Ordinance (Ch. 90) § 90-1311(a)(2) (Form Based Code, Div. 3)
Sec. 90-1311. - Lighting. (a)Exterior site lighting, other than flag and decorative lighting, shall be confined to the development site and conform to the following:...(2)The light from any illumination source shall be designed so that the light intensity or brightness at any property line shall not exceed one foot candle.
Billboard Lighting
Wyoming, Michigan caps every digital billboard's light output at 0.2 foot candles above ambient light and requires automatic dimming hardware to hold it there. Sec. 90-709(8)(f)-(i) makes billboard owners certify compliance through an independent third party up front and, on the city's request, resubmit a test report within 15 days, valid for only 90 days.
Wyoming, MI Billboard Brightness & Dimming Rules
Some RestrictionsWyoming Zoning Ordinance (Ch. 90) § 90-709(8)(f)-(i)
(f)Maximum brightness of an EMC shall not exceed 0.2 foot candles above ambient light.(g)All signs regulated under this section shall possess and utilize automatic dimming controls set to automatically adjust to the limits defined in this section.(h)Owners of signs regulated under this section shall submit an initial third-party certification for each sign verifying the sign is equipped with a ...
Looking for Kent County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Wyoming city rules.
Outdoor Lighting in Kent County →