Port St. Lucie requires a building permit for all fences over 4 feet or within setback areas. Applications require a site plan and wind-load engineering for certain materials.
A permit is required from the Port St. Lucie Building Department for any fence over 4 feet in height, any fence in a setback area, and any wall or masonry fence. The application must include a survey showing property lines, setbacks, and easements; a site plan indicating fence location, height, and materials; and for some fences, engineering showing compliance with Florida Building Code wind-load requirements. Port St. Lucie is outside the HVHZ but is subject to FL Building Code ultimate wind speeds of approximately 150 mph. Chain-link and wood fences over 6 feet typically need engineering. Permit fees vary based on project value.
Contact your local code enforcement office for specific penalty information.
Port St. Lucie, FL
Persistent dog barking in Port St. Lucie constitutes a public nuisance under City Code Chapter 14. St. Lucie County Animal Safety Services and city Code Enfo...
Port St. Lucie, FL
Commercial properties in Port St. Lucie must keep noise within 65 dBA during day and 55 dBA at night at the nearest residential property line.
Port St. Lucie, FL
Construction noise in Port St. Lucie is permitted Monday through Saturday between 7 AM and 7 PM. Sunday and holiday construction requires special permission ...
Port St. Lucie, FL
Gas-powered lawn equipment is allowed in Port St. Lucie between 7 AM and 7 PM. No special decibel limits apply beyond the general nuisance standard.
Port St. Lucie, FL
Loud parties and gatherings are prohibited after 10 PM in Port St. Lucie. Second response within 24 hours triggers mandatory citation under city policy.
Port St. Lucie, FL
Modified exhaust, loud mufflers, and jake brakes are prohibited in Port St. Lucie under city code and FL §316.272. Truck engine braking banned on I-95 ramps ...
See how Port St. Lucie's permit requirements rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.