Skip to main content

Fruitport Charter Township, MI Outdoor Lighting: Billboard Lighting (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

Billboard light rule
Rays cast directly upon the billboard only
Visible to motorists
Not directly, only as reflected from the billboard
Visible to nearby buildings
Not directly, only as reflected
Flashing light
No sign may be illuminated by flashing light
Brightness or hours limit
None printed in the billboard subsection
Where billboards sit
Within 100 feet of I-96 and US 31

Summary

In Fruitport Charter Township, the light rays of an illuminated billboard must be cast directly upon the billboard and cannot be directly visible to freeway motorists or nearby buildings except as reflected. No sign may be lit by flashing light. Rules: Code § 42-673(9)i and § 42-671(c)(4).

(4) No sign shall contain any rotating or moving parts or be illuminated by flashing light. ... i. The light rays of an illuminated billboard shall be cast directly upon the billboard and shall not be directly visible to motorists on the freeway or to nearby buildings except as reflected from the billboard.

Full Breakdown

Section 42-673(9)i of the Fruitport Charter Township Code is the billboard lighting rule: the light rays of an illuminated billboard shall be cast directly upon the billboard and shall not be directly visible to motorists on the freeway or to nearby buildings except as reflected from the billboard. The test is what a person can see. The lamps themselves cannot be in view of freeway drivers or neighbors, and only light bouncing back off the billboard face is allowed to reach them.

That rule sits inside the freeway billboard subsection, which permits billboards only within 100 feet of the I-96 and US 31 freeways, on property in B-2, B-3, B-4, SC-1 or M-1, with PUD land needing variance approval. Lighting is therefore a condition on a billboard that is already limited by distance, panel count and size: no more than two sign panels, one panel facing each direction of traffic, and total panel area no greater than 672 square feet.

A second, broader rule applies to every sign in the township. Section 42-671(c)(4) says no sign shall contain any rotating or moving parts or be illuminated by flashing light. A billboard therefore cannot use a flashing lighting scheme, whatever its position along the freeway.

Section 42-673(5), which governs signs in the B and M districts, adds that all light sources used for the illumination of signs, business buildings or area surrounding them shall be completely shielded from the view of vehicular traffic using the public streets, except for diffused lighting within translucent signs. It also requires that no illumination or sign be placed or designed to be confused with or appear similar to an official traffic safety device. Section 42-671(c)(1) separately bars any sign from resembling the shape, size, form or color of railroad or traffic signs, signals or devices.

The billboard subsection prints no brightness figure, no measurement in footcandles or lumens, and no hours when the lighting must be turned off. The standard is the direct-visibility test. A billboard cannot be erected without a building permit from the building inspection department, and the application must include a blueprint with a minimum wind load rating of no less than 80 miles per hour and design approval by a state-licensed engineer. These rules apply in Fruitport Charter Township, outside the Village of Fruitport.

Violations & Fines

A billboard whose light rays are directly visible to freeway motorists or nearby buildings, other than as reflected from the billboard, breaks § 42-673(9)i. A sign lit by flashing light breaks § 42-671(c)(4). The sections print no fine of their own, and the building inspector issues the sign permits that these conditions attach to.

Frequently Asked Questions

Can a billboard in Fruitport Township be lit?
Yes, as an illuminated billboard, if the light rays are cast directly upon the billboard and are not directly visible to motorists on the freeway or to nearby buildings except as reflected from the billboard. Section 42-673(9)i prints this as the condition for lit billboards.
Can a billboard flash or use moving parts?
No. Section 42-671(c)(4) applies to every sign in the township and says no sign shall contain any rotating or moving parts or be illuminated by flashing light. That covers billboards along I-96 and US 31 as well as business signs.
Does the township set a brightness or curfew for billboard lights?
The billboard subsection prints no footcandle or lumen limit and no hours of operation. The only lighting tests it states are direct visibility to freeway motorists and nearby buildings, plus the township-wide bar on flashing light in § 42-671(c)(4).
Who issues the permit for an illuminated billboard?
The building inspection department. Section 42-673(9)k says no billboard shall be erected unless a building permit has been issued, and the application must include a blueprint with a wind load rating of at least 80 miles per hour and approval by a state-licensed engineer.

Sources & Official References

Other rules in Fruitport Charter Township

All Fruitport Charter Township rules

Compare Fruitport Charter Township to another location·View the Michigan outdoor lighting overview

Get notified when Billboard Lighting in Fruitport Charter Township, MI changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.