Skip to main content
CityRuleLookup

Laurens County, SC Parking Rules: Loading Zones (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Loading space size
10 feet by 25 feet
Overhead clearance
14 feet minimum
Base ratio
1 berth per 20,000 sq ft GFA
Berths, up to 25,000 sq ft
1 berth
Berths, 150,001-200,000 sq ft
5 berths
Delivery/collection curfew
Barred 10 p.m. to 6 a.m.

Summary

Commercial development built under Laurens County's subdivision ordinance must provide off-street loading berths sized ten feet by 25 feet with 14 feet of overhead clearance, one for every 20,000 square feet of gross floor area, scaled up under Table J for larger buildings.

These county ordinances apply to unincorporated areas of Laurens County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

(j)Loading areas.(1)The arrangement of truck loading and unloading facilities for commercial development shall be such that in the process of loading or unloading, no truck shall block or impact the flow of traffic on any adjacent street.(2)Commercial uses. Each use shall provide one loading space, measuring ten feet by 25 feet with overhead clearance of 14 feet, for each 20,000 square feet of gross floor area or fraction thereof and based on the gross floor area as shown in Table J below: ... Gross Floor Area in Structure (sq. ft.) Number of Berths 0—25,000 1 25,001—50,000 2 50,001—100,000 3 100,001—150,000 4 150,001—200,000 5 Each 100,000 above 200,000 1

Full Breakdown

Appendix A of the Laurens County Residential Subdivisions Ordinance, under its loading areas provisions, requires that truck loading and unloading facilities for commercial development be arranged so that no truck blocks or impacts traffic flow on an adjacent street while loading or unloading. For commercial uses, the ordinance requires one loading space for each 20,000 square feet of gross floor area or fraction thereof, with each space measuring ten feet by 25 feet and providing 14 feet of overhead clearance. Table J then converts that ratio into a fixed berth count keyed to a structure's total gross floor area: a building up to 25,000 square feet needs one berth, 25,001 to 50,000 square feet needs two, 50,001 to 100,000 square feet needs three, 100,001 to 150,000 square feet needs four, and 150,001 to 200,000 square feet needs five, with one more berth required for each additional 100,000 square feet above 200,000.

The loading requirements sit next to Appendix A's dumpster screening rules in the same subsection, which bar dumpster placement on public streets, alleys, or sidewalks, require an 18-foot concrete pad and 12-foot enclosure opening for each dumpster, and prohibit service, delivery, and waste collection activity at commercial developments between 10:00 p.m. and 6:00 a.m. Both the loading berth count and the dumpster rules are reviewed by the county's Technical Review Committee as part of site plan approval before a commercial development can move to construction in unincorporated Laurens County.

Violations & Fines

A commercial site plan that does not provide the loading berths required by Table J, or that sizes a loading space smaller than ten feet by 25 feet with 14 feet of overhead clearance, does not clear Technical Review Committee approval under Appendix A. Running deliveries or waste collection between 10:00 p.m. and 6:00 a.m. is a separate violation of the same subsection's dumpster and noise provisions.

Frequently Asked Questions

How many loading spaces does a commercial building need in unincorporated Laurens County?
Appendix A of the county's subdivision ordinance requires one loading space per 20,000 square feet of gross floor area, but Table J sets fixed tiers: a building up to 25,000 square feet needs one berth, rising to two, three, four, and five berths as the building grows to 200,000 square feet, plus one more per additional 100,000 square feet.
How big does a loading space have to be in Laurens County?
Each required loading space must measure ten feet by 25 feet and provide 14 feet of overhead clearance, under Appendix A's loading areas provisions. The space also has to be arranged so a truck using it does not block traffic on the adjacent street.
Are there hours when a commercial loading dock cannot be used in Laurens County?
Yes. The same Appendix A subsection that sets the loading berth standards bars service, deliveries, waste collection, and similar commercial activities involving waste collection between 10:00 p.m. and 6:00 a.m., and requires compliance with the county's noise ordinance under Chapter 18, Article II during other hours.

Sources & Official References

Other rules in Laurens County

All Laurens County rules

Compare Laurens County to another location·View the South Carolina parking rules overview

Get notified when Loading Zones in Laurens County, SC changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.