Pinellas County, FL Sign Regulations: Window Signs (2026)

Temporary window signs. Such signs shall be allowed in areas classified as multifamily residential, office, commercial, industrial and public/semipublic. The maximum area of such signs in areas classified as office, commercial, industrial, and public/semipublic shall be 25 percent of windowpane area or 100 square feet, whichever is less. In multifamily residential areas, the area of temporary window signs shall not exceed 25 square feet.(j)Warning signs. Such signs shall not exceed six square feet in area per sign face.(k)Temporary signs. The criteria required for temporary signs are set forth in Table 138-3753.a—Temporary Signs Design Standards and Limitations, below. A temporary sign is unlawful if it does not meet the criteria established for the zoning district category group in which the sign is located. Table 138-3753.a — Temporary Signs Design Standards and Limitations

District Category Group Single Family and Multi Family Office and Commercial, and Industrial Public/Semi-Public, Mixed-Use, and Special Maximum Number of Signs Per Parcel 1 4 4 4

Maximum Sign Area 2 6 sf. 32 sf. 16 sf. Sign Height Maximum for a Freestanding Sign 3 5 ft. 5 ft. 5 ft. Sign Height Maximum for a Wall Sign (inclusive of a Window Sign) 15 ft. 15 ft. 15 ft. Minimum Sign Setback for Ground Signs 4 3 ft. 3 ft. 3 ft. Minimum Spacing from any Other Sign (Temporary Sign or as a Permanent Sign) 5 15 ft. 15 ft. 15 ft.