Victorville, CA Sign Regulations: Window Signs (2026)
Key Facts
- Standard cap
- 10% of window area, C-1/C-2/C-4/CM/CA districts
- C-2 district cap
- 20% of window area
- Permit needed?
- No, if within the percentage cap
- Governing tables
- Table 22-2 and Table 22-3, Sec. 16-3.22.130
Summary
Victorville caps window signage at 10 percent of a storefront's window area in most commercial zones, rising to 20 percent inside the C-2 General Commercial district, under Development Code Table 22-3. No sign permit is required as long as coverage stays within that cap.
(f)Window signs are regulated within Section 16-3.22.130 and 16-3.22.140 of this Chapter. ... Table 22-3 - Permitted Signs in the C1, C2, C4 and CM commercial districts ... Window | Window on building | Any | 10% of window area (20% within C-2 District) | N/A | N/A | No permit required
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 57).
Full Breakdown
Article 22 (Signs) of the Development Code sets window-sign limits by zoning district inside its permitted-sign tables. 130, lists "Window" signage with a maximum area of "10% of window area (20% within C-2 District)" and states "No permit required" for signage kept within that cap. " Both tables measure the allowance against the glazed window area of the building rather than the wall or storefront overall, and neither table imposes a height limit on window signage since the signs sit inside the glass rather than being freestanding or wall-mounted.
140 of this Chapter," confirming that window coverage is governed by the district-specific tables rather than one citywide rule. A sign that exceeds the percentage cap, or that combines with other window obstructions such as vending machines, shelves or storage racks in a way that blocks more of the window than the table allows, loses the no-permit exemption and becomes subject to the City's sign-permit process.
Violations & Fines
A window sign display that exceeds 10 percent of the glass area (20 percent in C-2) loses its no-permit exemption and becomes an unpermitted sign under Article 22, which the Development Department can order removed or brought into conformance. Continued display in violation of the Development Code is enforceable under Chapter 1.04, Section 1.04.010, as a misdemeanor under California Penal Code Section 19, or as an infraction with escalating $100 to $1,000 fines for repeat violations within a year.
Frequently Asked Questions
How much of my storefront window can I cover with signage in Victorville?
Do I need a sign permit for window signs in Victorville?
Are window signs limited by height like monument or wall signs?
Sources & Official References
Other rules in Victorville
California rules heatmap·Compare Victorville to another location·View the California sign regulations overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Window Signs in Nearby Cities
How other cities in San Bernardino County handle window signs.