Skip to main content
CityRuleLookup

Hemet, CA Building Safety: Door Locking Hardware (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Solid-core doors
1-3/8 in. minimum thickness
Deadbolt lock
1-inch minimum throw
Sliding glass doors
top and bottom slide deadbolts
Applies to
condominium projects only

Summary

Hemet requires solid-core exterior doors with deadbolt locks meeting minimum thickness and throw specifications on condominium projects, plus door-jamb reinforcement and hinge security standards to reduce burglary risk in multi-unit developments.

(g)Doors.(1)All exterior doors and doors leading from garage areas into private units shall be of solid core construction with a minimum thickness of one and three-eighths inches with panels not less than nine-sixteenths-inch thick...(2)Exterior doors and doors leading from garage areas into private units shall be...equipped with a double-cylinder or single-cylinder deadbolt lock with a minimum one-inch throw, working in concert with a key-in-knob deadlatch mechanism...

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 69 Update 2).

Full Breakdown

Hemet's condominium structural standards (Chapter 90, Article VIII, Condominiums Generally) require every exterior door and every door between a garage and a private unit to be solid-core, at least 1-3/8 inches thick, with panels at least 9/16 inch thick, except metal or glass portions. Locking hardware must include a single- or double-cylinder deadbolt with a minimum one-inch throw working with a key-in-knob deadlatch. The same section also sets door-jamb reinforcement, strike-plate steel gauge, non-removable hinge pins, tempered glazing near locks, and wide-angle door viewer requirements. These are condominium-project security standards, not a citywide requirement for single-family homes.

Violations & Fines

Noncompliant door hardware blocks project approval: the city ties condominium tentative map and building permit sign-off to compliance with Section 90-214's structural and security standards before final inspection.

Frequently Asked Questions

Does this apply to single-family homes in Hemet?
No. Section 90-214(g) governs condominium projects only, as part of Hemet's condominium structural requirements, not a citywide building code mandate for single-family homes.
What lock hardware satisfies the deadbolt requirement?
A double-cylinder or single-cylinder deadbolt with a minimum one-inch throw, paired with a key-in-knob deadlatch; sliding glass and double-door stationary panels instead need top-and-bottom slide deadbolts.

Sources & Official References

Other rules in Hemet

All Hemet rules

California rules heatmap·Compare Hemet to another location·View the California building safety overview

Get notified when Door Locking Hardware in Hemet, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Door Locking Hardware in Nearby Cities

How other cities in Riverside County handle door locking hardware.

Palm Springs, CA
Some Restrictions