Skip to main content
CityRuleLookup

Olathe, KS Building Safety: Door Locking Hardware (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Deadbolt
minimum 1 in projection
Cylinder
minimum 5 pin tumblers
Standard
ANSI Grade 2 deadbolt
Applies to
new/altered one- and two-family doors

Summary

New and altered one- and two-family homes in Olathe must have exterior doors fitted with a single-cylinder deadbolt meeting minimum size, pin-tumbler, and ANSI Grade 2 specifications under the city's added Physical Security section.

1031.4.4 Locks. Exterior doors shall be provided with a locking device complying with one of the following: Single Cylinder Deadbolt shall have a minimum projection of one inch (1"). The deadbolt shall penetrate at least three-fourths inch (3/4") into the strike receiving the projected bolt. The cylinder shall have a twist-resistant, tapered hardened steel cylinder guard. The cylinder shall have a minimum of five (5) pin tumblers... All deadbolts shall meet ANSI grade 2 specifications.

View official code

Official source re-checked September 8, 2026: no newer edition of the code had been published (publisher’s edition: current through Ordinance 26-39, passed July 21, 2026).

Full Breakdown

Olathe added Section 1031 (Physical Security) to its building code to make new construction resistant to unlawful entry, and it applies to all new residential structures plus alterations, additions, and repairs covered by the Existing Building Code (§15.02.370, 1031.1.1). Door hardware rules in 1031.4 cover hinges, strike plates, escutcheon plates, and locks. The lock provision, 1031.4.4, requires a single-cylinder deadbolt with minimum projection and pin-tumbler specs, or an equivalent lock meeting the same ANSI Grade 2 standard. Companion sections require secondary locks on sliding glass doors (1031.2.5) and a 180-degree door viewer on main entry doors (1031.4.5).

Violations & Fines

Doors that don't meet the hardware specification can fail the required rough-in or final inspection, holding up the permit and Certificate of Occupancy until corrected; the Building Codes Division enforces the standard.

Frequently Asked Questions

Does Olathe require a specific type of door lock on new houses?
Yes, §15.02.370 (added IBC §1031.4.4) requires exterior doors on new or altered one- and two-family homes to have a single-cylinder deadbolt with at least 5 pin tumblers meeting ANSI Grade 2.
Does this apply to my existing, unaltered house?
No: it applies to new residential construction and to alterations, additions, or repairs covered by the Existing Building Code, not to unchanged older doors.

Sources & Official References

Other rules in Olathe

All Olathe rules

Compare Olathe to another location·View the Kansas building safety overview

Get notified when Door Locking Hardware in Olathe, KS changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.