Skip to main content
CityRuleLookup

Hammond, IN Building Safety: Electrical Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

NEC edition adopted
2002 edition, by reference
Permit fee, $500-$15,000 valuation
$50 + 1.75% of contract
Permit fee, over $15,001
$120 + 1.25% of contract
Inspection fee, all projects
$75
Stop-work re-permit surcharge
$250 residential / $500 commercial
Reenergizing after 90+ day disconnect
Inspector approval required

Summary

The City of Hammond, Indiana adopted the 2002 National Electrical Code by reference under § 151.03, and the Electrical Inspection Department issues permits for all electrical work, charging a valuation-based fee under § 151.51 plus a flat $75 inspection fee.

§ 151.03 ADOPTION OF NATIONAL ELECTRICAL CODE. The National Electrical Code as sponsored by the United States of America Standards Institute, being particularly the 2002 edition thereof, is hereby adopted. Three copies of the National Electrical Code are now filed in the office of the City Clerk. The National Electrical Code is hereby adopted by reference and incorporated as fully as if set out at length herein. ... § 151.51 PERMIT FEE SCHEDULE. Any person, contractor, or company desiring an electrical permit for work to be performed in the city shall, at the time the permit is issued therefor, pay to the City Controller, a fee for their portion of the contracted price of the project, as required in this section. ... For a total valuation from $500 to $50 base fee + (1.75% x contract amount) $15,000 ... For a total valuation of $15,001 and $120 base fee + (1.25% x contract above amount) ... Inspection fee (all projects) $75

Full Breakdown

C. 36-1-5-4. 02 extends that code, along with the rules of the state Fire Marshal, the city's Electrical Commission and Electrical Inspection Department, and the Administrative Building Council of Indiana, to all electrical construction, installation, repair and maintenance in the city, covering private residences, outbuildings, agricultural buildings and temporary construction buildings, but excluding radio, television and telegraph apparatus and public-utility equipment under the state Public Service Commission. 16 gives the Electrical Inspection Department the power to issue permits for installation and alteration of electrical work, and bars issuing a permit to anyone not licensed, except a property owner doing their own work on their own property.

25% of the contract amount above $15,001, plus a flat $75 inspection fee on all projects and a permit extension fee of 50% of the original permit cost. Anyone who pulls a permit after a residential stop-work order pays an additional $250, or $500 after a commercial stop-work order. 04 separately requires any electrical service disconnected more than 90 days to be inspected and approved by the Electrical Inspector before NIPSCO reenergizes the line.

Violations & Fines

General violations of this chapter are punishable under § 10.99. Doing electrical work without a license, or without the required permit, exposes the unlicensed party to enforcement by the Electrical Inspection Department, which may condemn noncompliant work in whole or in part under its § 151.16 inspection authority.

Frequently Asked Questions

What electrical code applies in Hammond, Indiana?
Section 151.03 adopts the 2002 edition of the National Electrical Code by reference, with copies on file at the City Clerk's office, incorporated as fully as if set out at length in the ordinance.
Who issues electrical permits in Hammond?
The Electrical Inspection Department issues permits for installation and alteration of electrical work under § 151.16, and it will not issue one unless the applicant is a licensed electrical contractor, except an owner working on their own property.
How is the Hammond electrical permit fee calculated?
Under § 151.51, work valued $500 to $15,000 costs $50 plus 1.75% of the contract amount; work above $15,001 costs $120 plus 1.25% of the contract amount, and a flat $75 inspection fee applies to all projects.
Can a homeowner do their own electrical work in Hammond?
Yes. Section 151.50 lets a property owner obtain a permit for electrical work on their own property without a license by showing the Chief Electrical Inspector sketches of the planned work and paying the § 151.51 fee.

Sources & Official References

Other rules in Hammond

All Hammond rules

Compare Hammond to another location·View the Indiana building safety overview

Get notified when Electrical Permits in Hammond, IN changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.