Skip to main content

Murray, KY Building Setbacks & Zoning: Lot Coverage Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

R-1 and R-2 maximum lot coverage
35%
R-3, R-3A, R-4, R-5 maximum lot coverage
50%
Business districts (§ 156.037)
No limitation printed
Professional Office district (§ 156.038)
35%
Accessory buildings
Rear yard only, 5 feet from lot lines
Uncontested zoning fine
$150, $200, then $500

Summary

In Murray, buildings in the R-1 and R-2 single-family districts can cover no more than 35% of a lot. The R-3, R-3A, R-4 and R-5 multi-family districts allow 50%. The cap sits in the lot, yard, and height regulations of the Chapter 156 zoning code, and the Zoning Official enforces it.

(F) Lot, yard, and height regulations. ... (6) Maximum lot coverage. R-1 and R-2 - 35%. ... *Subdivision regulations may vary from subdivision to subdivision. Please check to see if setbacks differ and if accessory buildings are allowed and where they are allowed.

Full Breakdown

Murray sets lot coverage as a flat percentage in each residential district of Chapter 156 of the Code of Ordinances. For R-1 and R-2, § 156.035(F)(6) reads: Maximum lot coverage. R-1 and R-2 - 35%. The same division fixes the other envelope numbers for those districts: a 15,000 square foot minimum lot in R-1 and 10,000 square feet in R-2, front yards of 40 feet (R-1) and 30 feet (R-2), side yards of 15 feet and 10 feet, and a 25 foot rear yard in both districts. Height is capped separately at 35 feet in division (7).

The multi-family districts carry a higher ceiling. Section 156.036(F)(6) allows 50% coverage in R-3, R-3A, R-4 and R-5, with a 7,500 square foot minimum lot in R-3, R-3A and R-4, 5,000 square feet in R-5, and a Floor Area Ratio of 0.5. The business districts in § 156.037 print "No limitation" on their maximum lot coverage lines, while the Professional Office district in § 156.038 prints 35%.

Accessory buildings sit under the same ceiling. Section 156.011(C) states that accessory buildings in residential zones shall not exceed the lot coverage nor the total square footage of the building to which they are accessory. Section 156.035(C)(1) lists carports, private garages, storage sheds, and parking areas as permitted accessory structures, and division (F)(8) allows accessory buildings only in rear yards, at least five feet from all lot lines except on corner lots, where secondary yard restrictions apply.

The footnote under the R-1 and R-2 regulations tells owners to check their own subdivision regulations, since a subdivision can set different setbacks and different accessory building rules than the zoning code. For relief, § 156.082 gives the Board of Zoning Adjustments power over dimensional variances, which it defines as height or width of building or size of yards, but not population density. That parenthetical does not name lot coverage, so ask the Zoning Official whether a coverage request qualifies before filing.

Violations & Fines

Failure to comply with the zoning code is a violation under § 156.999(A), and a separate civil fine is assessed for each day it continues. The Zoning Ordinance schedule in § 40.15 sets uncontested fines of $150, $200 and $500 for the first, second and each additional offense. A contested citation goes to the Code Enforcement Board, which can impose $200 to $500. Section 156.999(A)(2) adds a misdemeanor fine of $100 to $500 for each lot or parcel sold or transferred in violation.

Frequently Asked Questions

How much of my lot can I cover in an R-1 or R-2 zone in Murray?
Section 156.035(F)(6) caps maximum lot coverage at 35% for both R-1 and R-2. The same section requires a 15,000 square foot lot in R-1 and 10,000 square feet in R-2, plus 25 foot rear yards, so the coverage cap works alongside yard and lot size minimums.
Do Murray's multi-family districts allow more coverage?
Yes. Section 156.036(F)(6) sets maximum lot coverage at 50% for R-3, R-3A, R-4 and R-5. Those districts also carry a Floor Area Ratio of 0.5 and a minimum lot of 7,500 square feet in R-3, R-3A and R-4, or 5,000 square feet in R-5.
Do sheds and garages count against the limit in Murray?
Section 156.011(C) says accessory buildings in residential zones shall not exceed the lot coverage nor the total square footage of the building to which they are accessory. Under § 156.035(F)(8) they go in rear yards only and stay at least five feet from all lot lines, except on corner lots.
Can I ask for a variance from the coverage cap?
The Board of Zoning Adjustments hears dimensional variances under § 156.082, which the section describes as height or width of building or size of yards, but not population density. Lot coverage is not named in that list, so confirm with the Zoning Official whether your request fits before applying.
What happens if a Murray property exceeds the coverage limit?
It is a zoning violation under § 156.999(A), and a separate civil fine accrues for each day it continues. Section 40.15 sets uncontested zoning fines of $150, $200 and $500, and the Code Enforcement Board can impose $200 to $500 on a contested citation.

Sources & Official References

Other rules in Murray

All Murray rules

Compare Murray to another location·View the Kentucky building setbacks & zoning overview

Get notified when Lot Coverage Limits in Murray, KY changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.