Skip to main content

Murray, KY Building Setbacks & Zoning: Setback Rules (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

Front yard
40 feet in R-1, 30 feet in R-2
Corner lot, secondary street
Minimum of 25 feet
Side yard
15 feet in R-1, 10 feet in R-2
Rear yard
25 feet in R-1 and R-2
Maximum height and coverage
35 feet and 35% in R-1 and R-2
Relief
Dimensional variance from the Board of Zoning Adjustments

Summary

In Murray's R-1 and R-2 districts, the minimum front yard is 40 feet in R-1 and 30 feet in R-2, side yards are 15 feet in R-1 and 10 feet in R-2, and the rear yard is 25 feet in both. Corner lots need a minimum of 25 feet facing the secondary street.

(3) Minimum front yards. (a) R-1 - 40 feet (b) R-2 - 30 feet (c) The front yard on corner lots shall be as designated for the front yard facing the principal street and a minimum of 25 feet for the front yard facing the secondary street. (4) Minimum side yards. (a) R-1 - 15 feet. (b) R-2 - 10 feet. (5) Minimum rear yards. R-1 and R-2 - 25 feet.

Full Breakdown

Section 156.035(F) sets the lot, yard and height regulations for the R-1 and R-2 single-family districts. Minimum front yards are 40 feet in R-1 and 30 feet in R-2. The front yard on corner lots is as designated for the front yard facing the principal street, with a minimum of 25 feet for the front yard facing the secondary street. Minimum side yards are 15 feet in R-1 and 10 feet in R-2. The minimum rear yard is 25 feet in both R-1 and R-2.

The same division sets the envelope those yards sit in. Minimum lots are 15,000 square feet in R-1 and 10,000 square feet in R-2, with minimum frontage on a public street of 100 feet in R-1 and 75 feet in R-2. Maximum lot coverage is 35% and maximum height is 35 feet in both districts. Section 156.035 also carries a note that subdivision regulations may vary from subdivision to subdivision, so owners are told to check whether setbacks differ.

The general lots and yards section, § 156.012, adds rules that apply everywhere. No yard or lot existing at the time of adoption of the zoning code can be reduced in dimension or area below the minimum requirements, and yards or lots created afterward must meet at least those minimums. Double-frontage lots must meet the front-yard regulations of the district on both of the adjacent streets. At street and railroad intersections, no obstruction to vision between a height of two and one-half feet and twelve feet is permitted within the area defined by the intersecting right-of-way lines and a straight line connecting points fifty feet from their intersection.

An owner who cannot meet a yard minimum because of the exceptional narrowness, shallowness, or unusual shape of the site can apply to the Board of Zoning Adjustments for a dimensional variance under § 156.082.

Violations & Fines

Building inside a required yard breaches the zoning code and is a violation under § 156.999. The violator is subject to a fine as detailed in § 40.15, and a separate civil fine is assessed for each day the violation continues. A person who violates the zoning code is also guilty of a misdemeanor on conviction, fined not less than $100 nor more than $500 for each lot or parcel that was the subject of a sale or transfer or contract for sale or transfer.

Frequently Asked Questions

What is the minimum front setback in Murray R-1 and R-2?
The minimum front yard is 40 feet in R-1 and 30 feet in R-2 under § 156.035(F)(3). On corner lots the front yard facing the principal street is as designated, and the yard facing the secondary street is a minimum of 25 feet.
How far must a house sit from the side and rear lot lines?
Minimum side yards are 15 feet in R-1 and 10 feet in R-2. The minimum rear yard is 25 feet in both districts. Those numbers come from § 156.035(F)(4) and (F)(5) and apply to the principal building on the lot.
Can I get an exception to a Murray yard requirement?
The Board of Zoning Adjustments hears dimensional variance applications under § 156.082 where the narrowness, shallowness, unusual shape or topography of the site would make literal enforcement a hardship. The Board must find the variance will not adversely affect public health, safety or welfare, and it cannot grant a variance for a use the zoning code does not permit.
Do the same setbacks apply in every Murray subdivision?
Not necessarily. Section 156.035 carries a note that subdivision regulations may vary from subdivision to subdivision and asks owners to check whether setbacks differ. The zoning figures are the minimums, and § 156.012(B) forbids reducing any yard below them.

Sources & Official References

Other rules in Murray

All Murray rules

Compare Murray to another location·View the Kentucky building setbacks & zoning overview

Get notified when Setback Rules in Murray, KY changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.