Skip to main content

Alpine, TX Building Setbacks & Zoning: Setback Rules (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

R-1 front yard minimum
25 ft
R-1 street side yard minimum
12 feet 6 inches
R-1 interior side yard minimum
5 feet
R-1 rear yard
10% of depth or not < 15 feet
Projections
No window sills, belt courses or cornices within setbacks
Public buildings next to a residential zone
Side yard of not less than 25 feet

Summary

In Alpine, an R-1 one-family lot needs a 25 ft front yard, a 12 feet 6 inches street side yard, a 5 foot interior side yard and a rear yard of 10% of depth or not less than 15 feet. The R-2 multi-family table prints the same four figures. Architectural features cannot project into those setbacks.

Each site in the R-1 district shall be subject to the following site development regulations: Feature Regulations ... Front yard minimum 25 ft* Street side yard minimum 12 feet 6 inches* Interior side yard minimum 5 feet* Rear yard 10% of depth or not < 15 feet ... *No window sills, belt courses, cornices, and other architectural features will project within the setbacks stated above.

Full Breakdown

Appendix C of the Alpine Code of Ordinances prints yard minimums inside each district's site development table. For the R-1 one-family district (Article I, Section II), the front yard minimum is 25 ft, the street side yard minimum is 12 feet 6 inches, the interior side yard minimum is 5 feet, and the rear yard is 10% of depth or not < 15 feet. Lot width minimum in the same table is 50 feet. Three of the four yard lines carry an asterisk, and the footnote states that no window sills, belt courses, cornices, and other architectural features will project within the setbacks stated above. The footnote is why a cornice or belt course cannot be used to claim extra building footprint inside the yard.

The R-2 multi-family table (Section III), which governs duplexes, townhouses, triplexes and quadplexes, repeats the same figures: 25 feet front, 12 feet 6 inches street side, 5 feet interior side, and a rear yard of 10 % of depth or not < 15 feet. The R-3 apartment table (Section IV) takes a different approach on the sides: its street side yard minimum and interior side yard minimum both read Must Meet IBC/IRC Code requirements, so the adopted building codes set those distances for apartment sites.

Two cross-references in the R-1 table send readers to further rules. Special yard regulations point to Section VIII, and Fences, walls and visibility point to Section 6. Section VIII adds that a side yard of not less than 25 feet must be provided on the side of a lot adjoining any residential zone (R-1, R-2, R-3 and R-4) for all schools, libraries, churches, community houses, clubs and other public or semi-public buildings hereafter erected or structurally altered.

Accessory structures have their own yard limits in the same table: a temporary or accessory building is held to no more than 40% of the required rear yard, and a carport to no more than 40% of the required front, side or rear yard.

Violations & Fines

The setback table prints no penalty of its own. A building that sits inside the 25 ft front yard, the 12 feet 6 inches street side yard, the 5 foot interior side yard or the rear yard minimum departs from the R-1 district regulation, and an architectural feature such as a cornice or belt course that projects into a setback is barred by the table's asterisk note.

Frequently Asked Questions

What is the front setback for a house in Alpine's R-1 district?
The R-1 site development table in Appendix C prints a front yard minimum of 25 ft. The same table sets a 12 feet 6 inches street side yard, a 5 foot interior side yard, and a rear yard of 10% of depth or not < 15 feet.
Can a cornice or window sill extend into an Alpine setback?
No. The footnote to the R-1 table says no window sills, belt courses, cornices, and other architectural features will project within the setbacks stated above. The asterisk is attached to the front, street side and interior side yard lines.
Are R-2 setbacks different from R-1 in Alpine?
The R-2 multi-family table prints the same figures for duplexes, townhouses, triplexes and quadplexes: 25 feet front, 12 feet 6 inches street side, 5 feet interior side and a rear yard of 10 % of depth or not < 15 feet.
How are side yards set for apartments in Alpine?
The R-3 apartment table does not print a distance for the street side or interior side yard. Both lines read Must Meet IBC/IRC Code requirements, so the building code requirements control those sides of an apartment site.

Sources & Official References

Other rules in Alpine

All Alpine rules

Texas rules heatmap·Compare Alpine to another location·View the Texas building setbacks & zoning overview

Get notified when Setback Rules in Alpine, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.