Building Setbacks & Zoning in Acworth, GA (2026)
3 verified building setbacks & zoning rules for Acworth, Georgia, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
Acworth sets minimum yard setbacks by zoning district in Table 73-3.5 of the Zoning Ordinance, requiring 20 to 50 feet from the street depending on frontage type, plus separate interior side and rear setbacks that range from 5 feet in the R-5 district up to 40 feet in the RM-6 multi-family district.
Acworth Yard Setback Minimums by Zoning District
Some RestrictionsAcworth Code of Ordinances, Appendix B (Zoning Ordinance) § 73-3.5, Table 73-3.5.A
Residential R-1 R-2 R-3 R-5 RM-6 RM-8 ... Minimum Street Setback (arterial) (feet) 30 ft 30 ft 25 ft 20 ft 50 ft 50 ft Minimum Street Setback (other) (feet) 20 ft 20 ft 15 ft 20 ft 40 ft 40 ft Interior Setback (feet) 15 ft 10 ft 10 ft 5 ft 25 ft 25 ft Rear Setback (feet) 40 ft 30 ft 20 ft 10 ft 40 ft 40 ft
Structure Height Limits
Acworth caps building height by zoning district in Table 73-3.5 of the Zoning Ordinance: 35 feet in the R-1 through R-5 single-family districts, 45 feet in the RM-6 and RM-8 multi-family districts, and 35 to 50 feet across the commercial, office and industrial districts depending on which one applies.
Acworth Zoning District Building Height Limits
Some RestrictionsAcworth Code of Ordinances, Appendix B (Zoning Ordinance) § 73-3.5, Tables 73-3.5.A-B
Residential R-1 R-2 R-3 R-5 RM-6 RM-8 ... Maximum ... Building Height (in feet) 35 ft 35 ft 35 ft 35 ft 45 ft 45 ft ... Non-Residential C-1 C-2 OP LI HI ... Maximum ... Building Height (in feet) 40 ft 50 ft 35 ft 50 ft 50 ft
Lot Coverage Limits
Acworth's Zoning Ordinance limits how much of a lot can be covered by buildings, pavement and other impervious surface: from 40 percent in the R-1 district up to 60 percent in RM-8, and as high as 80 percent in most commercial and industrial districts, under Table 73-3.5 of the dimensional standards.
Acworth Zoning Impervious Surface Limits by District
Some RestrictionsAcworth Code of Ordinances, Appendix B (Zoning Ordinance) § 73-3.5, Tables 73-3.5.A-B
Residential R-1 R-2 R-3 R-5 RM-6 RM-8 ... Maximum Impervious Surface Ratio (ISR, as percent of lot area) 40% 40% 45% 45% 55% 60% ... Non-Residential C-1 C-2 OP LI HI ... Maximum Impervious Surface Ratio (ISR, as percent of lot area) 80% 80% 70% 80% 80%
Looking for Cobb County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Acworth city rules.
Building Setbacks & Zoning in Cobb County →