Skip to main content
CityRuleLookup

Building Safety in Acworth, GA (2026)

3 verified building safety rules for Acworth, Georgia, sourced directly from the municipal code and official government pages.

Verified from official government sources

Building Permits

Acworth enforces Georgia's state minimum construction codes rather than writing its own, and Section 18-56 requires a permit from the building official before anyone builds, alters, repairs, moves, or demolishes a building or structure, or installs a regulated electrical, gas, mechanical or plumbing system.

When Acworth Requires a Building Permit

Some Restrictions

Acworth Code of Ordinances §§ 18-31, 18-56

Sec. 18-31. - Adopted. (a)The following codes, the latest edition as adopted and amended by the state department of community affairs, shall be enforced by the city:(1)Georgia State Minimum Standard Building Code(2)Georgia State Minimum Standard One and Two Family Dwelling Code ... Sec. 18-56. - Permits. (a)Permit application.(1)Permitting required. When required, any owner, authorized agent, o...

Electrical Permits

Acworth enforces the Georgia State Minimum Standard Electrical Code on every electrical installation, addition, alteration or repair inside city limits. The Building Department issues the permit, sets the fee under the city's schedule of fees and charges, and inspects wiring before it can be closed in or energized. Building without one is treated as unlawful construction activity.

Acworth Electrical Permit Requirements

Some Restrictions

Acworth Code of Ordinances §§ 18-31(a)(7), 18-35, 18-53(a)(3)7

(6)Georgia State Minimum Standard Gas Code(7)Georgia State Minimum Standard Electrical Code(8)Georgia State Minimum Standard Energy Code ... Associated fees pertaining to the adopted construction codes listed section 18-31 shall include, but are not limited to: residential and commercial building, duct and envelope tightness verification, mechanical, heating, venting and air conditioning, plumb...

Plumbing Permits

Acworth enforces the Georgia State Minimum Standard Plumbing Code on every plumbing installation, alteration, repair or replacement tied to a water or sewer line inside city limits. The Building Department issues the permit and sets the fee, and every builder must also secure a sewer tap or county septic permit before the city will issue a building permit at all.

Acworth Plumbing Permit Requirements

Some Restrictions

Acworth Code of Ordinances §§ 18-31(a)(4), 18-36, 18-53(a)(3)4

(3)Georgia State Minimum Standard Fire Code(4)Georgia State Minimum Standard Plumbing Code(5)Georgia State Minimum Standard Mechanical Code ... Associated fees pertaining to the adopted construction codes listed section 18-31 shall include, but are not limited to: residential and commercial building, duct and envelope tightness verification, mechanical, heating, venting and air conditioning, pl...

Looking for Cobb County county-wide rules?

County ordinances apply to unincorporated areas and may supplement Acworth city rules.

Building Safety in Cobb County