Building Setbacks & Zoning in Daytona Beach, FL (2026)
3 verified building setbacks & zoning rules for Daytona Beach, Florida, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
Daytona Beach's Land Development Code fixes minimum yard setbacks separately for each residential zoning district in Article 4. In the Single-Family Residential-5 (SFR-5) district, front yards run 25 to 30 feet depending on lot width, street side yards 15 feet, interior side yards 5 to 10 feet, and rear yards 25 feet. Multifamily districts carry their own, generally tighter, tables.
Daytona Beach Yard Setback Minimums by Zone
Some RestrictionsDaytona Beach Land Development Code § 4.2.B.3 (Single-Family Residential-5 district, Intensity and Dimensional Standards)
3.Intensity and Dimensional Standards1. Platted Lot Width <50 ft 50≤60 ft >60 ft. Lot area, minimum 2 5,000 sf 2,9. Lot width, minimum 50 ft. Lot depth, minimum 100 ft. Lot frontage on an improved street, minimum 50 ft 3. Density, maximum (du/ac) n/a. Floor area ratio (FAR), maximum 4 0.5. Living area per dwelling unit, minimum 900 sf 900 sf 1,400 sf. Lot coverage, maximum (% of lot area) 35%. ...
Structure Height Limits
Daytona Beach caps principal dwellings in its primary single-family zone, SFR-5, at 35 feet under Land Development Code Section 4.2.B.3. The multifamily districts MFR-12, MFR-20 and MFR-40 carry the identical 35-foot ceiling. Detached accessory structures on single-family lots are held to 20 feet, and only a nonresidential building on a two-acre-plus arterial site can seek relief through a Special Use Permit.
Daytona Beach Residential Structure Height Limits
Some RestrictionsDaytona Beach Land Development Code § 4.2.B.3
Structure height, maximum 35 ft 5 ... 5. May be exceeded for a nonresidential structure with a Special Use Permit if the site is at least two acres in area and fronts on an existing arterial or major collector street, and all setbacks for the structure are increased 6 inches for each foot the structure's height exceeds 35 feet.
Lot Coverage Limits
Daytona Beach's Land Development Code caps how much of a lot can be covered by buildings, with limits set per zoning district. In the Single-Family Residential-5 (SFR-5) district, the most common residential zone, principal and accessory buildings together cannot cover more than 35% of the lot.
Daytona Beach Maximum Lot Coverage Limits
Some RestrictionsDaytona Beach Land Development Code § 4.2.B.3 (SFR-5 District)
3.Intensity and Dimensional Standards1. ... Lot area, minimum 2 5,000 sf 2,9 Lot width, minimum 50 ft Lot depth, minimum 100 ft Lot frontage on an improved street, minimum 50 ft 3 Density, maximum (du/ac) n/a Floor area ratio (FAR), maximum 4 0.5 Living area per dwelling unit, minimum 900 sf 900 sf 1,400 sf Lot coverage, maximum (% of lot area) 35% Structure height, maximum 35 ft 5 Front yard s...
Looking for Volusia County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Daytona Beach city rules.
Building Setbacks & Zoning in Volusia County →