Building Safety in Georgetown, KY (2026)
4 verified building safety rules for Georgetown, Kentucky, sourced directly from the municipal code and official government pages.
Verified from official government sources
Building Permits
Georgetown requires a permit from the building official before anyone constructs, enlarges, alters, repairs, moves or demolishes a building or structure, changes its occupancy, or inserts items such as heating or electrical. Ordinary minor repairs can be made with the building official's approval and no permit. Fees follow a schedule kept by the city clerk that rises three percent every two years.
Georgetown KY Building Permit Requirements
Some RestrictionsGeorgetown Code §§ 8-2, 8-3(a), 8-34
(a) Any owner, authorized agent or contractor who desires to construct, enlarge, alter, repair, move, demolish or change the occupancy of a building or structure, insert other items, such as heating, electrical, etc., or to cause any such work to be done, shall first make application to the building official and obtain the required permit therefor. (b) Ordinary minor repairs may be made with th...
Electrical Permits
Georgetown adopts the National Electrical Code, 2014 edition (NFPA 70), by reference. Electrical work needs a permit from the building official under Section 8-2, the installer must notify the building official before starting and when the work is ready for inspection, and no one can furnish current until the electrical inspector approves the installation and issues a certificate of approval.
Georgetown KY Electrical Code and Inspection Rules
Some RestrictionsGeorgetown Code §§ 8-57, 8-60, 8-61
The National Electrical Code, 2014 edition, also known as the NFPA 70, is hereby adopted by reference as if copied in full and set forth herein. ... It shall be the duty of the person installing electrical wiring or equipment, or repairing or rearranging same, to notify the building official prior to the time the work is commenced, and also when the work is ready for inspection, and it shall be...
Plumbing Permits
Georgetown adopts the Kentucky state plumbing code by reference and requires a plumbing installation permit from the county health department before anyone constructs, installs or alters a plumbing, sewage or drainage system. No permit is required to repair leaks, cocks or valves or to clean out waste or sewer pipes. The building official must approve plans before a permit issues.
Georgetown KY Plumbing Permit and State Plumbing Code
Some RestrictionsGeorgetown Code §§ 8-88, 8-89
The state plumbing code, promulgated by the state board of health on file with the Legislative Research Commission, Frankfort, Kentucky, is hereby adopted by reference and made a part hereof to the same extent as if set out in full herein. Provided, however, that section 1 of regulation PC-1 of the state plumbing code shall not apply and provided further that this article shall not apply to far...
Building Inspections
In Georgetown the building official can enter and inspect buildings between 8:00 a.m. and 5:00 p.m., or at any time in an emergency or at the owner's or occupant's request. The Georgetown-Scott County Department of Building Inspection enforces the Kentucky Building and Residential Codes through a program of plan review and inspections by state-certified inspectors.
Georgetown KY Building Inspection Program and Entry Hours
Some RestrictionsGeorgetown Code §§ 8-1, 8-32, 8-33
For the purpose of making surveys, inspections and investigations, the building official is hereby authorized, upon identification and statement of purpose, to enter, inspect, survey and investigate between the hours of 8:00 a.m. and 5:00 p.m., or at any time if an emergency exists, or if requested by the owner or occupant, all buildings, dwellings, dwelling units, rooming units and general pre...