Building Setbacks & Zoning in Hemet, CA (2026)
3 verified building setbacks & zoning rules for Hemet, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
Setbacks in the City of Hemet are set by zone in the Single-Family Residential Development Standards table (Section 90-314A). Front-yard minimums run 18 to 20 feet, rear yards 10 to 20 feet, and interior side yards 5 to 10 feet by zone (R-1-6: 18-ft front, 15-ft rear, 5-ft side). These are City of Hemet standards, not the county's.
Hemet Building Setback Rules
Some RestrictionsStructure Height Limits
In the City of Hemet's single-family residential zones, the maximum structure height is generally 35 feet and two stories, under the Development Standards table in Section 90-314A. The hillside zone (R-1-H) allows up to 40 feet and three stories. Certain rooftop appurtenances may exceed the limit. These limits are set by the city, not Riverside County.
Hemet Structure Height Limits
Some RestrictionsLot Coverage Limits
Maximum lot coverage in Hemet's single-family residential zones is set by the Development Standards table in Section 90-314A and varies by zone and stories. Higher-density zones (R-1-6, R-1-7.2, R-1-D) allow up to 65% one-story or 45% two-story, while larger-lot zones (R-A, R-1-10, R-1-20, R-1-40) cap coverage at 40%. At least 10% of the remaining area must be landscaped.
Hemet Lot Coverage
Some RestrictionsLooking for Riverside County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Hemet city rules.
Building Setbacks & Zoning in Riverside County →