Fence Regulations in Hemet, CA (2026)
7 verified fence regulations for Hemet, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
The City of Hemet's own zoning code (Chapter 90) limits fences, walls, screening, and hedges in single-family residential zones to a maximum of six feet in height in any required yard, but only 42 inches in a required front yard. Front-yard and corner-lot limits protect driver sight lines. These are city rules, not Riverside County's.
Hemet Fence Height Limits
Some RestrictionsPermit Requirements
The City of Hemet's Building & Safety Division lists fences and walls among activities that require a permit, so building or replacing a fence or wall in Hemet calls for city review. Separately, the statewide California Building Code exempts fences up to seven feet and retaining walls up to four feet.
Hemet Fence Permits
Some RestrictionsNeighbor Fence Rules
The City of Hemet's zoning code sets fence height and corner sight-distance limits, but who pays for a shared boundary fence is governed by California's Good Neighbor Fence Act, Civil Code Section 841. Adjoining owners are presumed to share equally in the reasonable cost, and an owner must give 30 days' written notice before charging a neighbor.
Hemet Shared Fence & Neighbor Rules
Some RestrictionsRetaining Walls
Hemet's zoning code does not publish a standalone retaining-wall height limit; the controlling standard is the California Building Code, which requires a permit for retaining walls over four feet (bottom of footing to top) or any wall supporting a surcharge. The city's Building & Safety Division reviews these walls, and a fence on top counts toward the fence height rules.
Hemet Retaining Walls
Some RestrictionsFence Requirements
Fences in Hemet must meet the city's zoning height limits (six feet in side/rear yards, 42 inches in a required front yard per Section 90-315), keep corner-lot sight-distance triangles clear above 42 inches, and stay within property lines. Pools must be enclosed by a barrier at least five feet high with a self-latching gate. These are City of Hemet rules.
Hemet Fence Requirements
Some RestrictionsMaterial Restrictions
In Hemet's residential zones, fence material is governed mainly by height rather than a broad ban, but in commercial and manufacturing zones the city's zoning code (Section 90-1046) requires street-facing fences to be decorative block or wrought iron and bars wood for interior industrial fencing. Where a manufacturing site adjoins a residential zone, a solid six-foot masonry wall is required.
Hemet Fence Material Restrictions
Some RestrictionsApproved Materials
Standard materials such as wood, masonry, and wrought iron are generally allowed for fences in Hemet's residential zones, subject to the city's height and sight-distance limits (Section 90-315). Commercial and manufacturing zones are stricter: under Section 90-1046, street-facing fences must be decorative block or wrought iron, and wood is barred for interior industrial fencing. These are City of Hemet standards.
Hemet Fence Materials
Some RestrictionsLooking for Riverside County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Hemet city rules.
Fence Regulations in Riverside County →