Building Setbacks & Zoning in Sanford, FL (2026)
3 verified building setbacks & zoning rules for Sanford, Florida, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In the City of Sanford, Florida, Schedule C of the Land Development Regulations fixes a minimum front, side and rear yard for every zoning district. Single-family SR-1 lots need a 25-foot front yard, 7.5-foot side yard and 20-foot rear yard, while SR-1AA and SR-1A require 10-foot side yards, and multifamily MR-1 through MR-3 require 30-foot front and 20-foot side and rear yards.
Sanford Minimum Yard Setbacks by Zoning District
Some RestrictionsSanford Land Development Regulations, Schedule C - Area and Dimension Regulations
REGULATIONS SR-1AA SR-1A SR-1 SR-2 MR-1 MR-2 MR-3 RMOI RC-1 GC-2 SC-3 RI-1 MI-2 AG Min. ... Front Yard Requirement 25 25 25 (3) 30 30 30 30 25 25 None 25 25 35 (2) Feet Min. Side Yard Requirement 10 10 7.5 (3) 20 20 20 20 10 20 None 15 15 20 Feet Min. Rear Yard Requirement 20 20 20 (3) 20 20 20 20 20 20 None 20 20 35 (2) Feet
Structure Height Limits
In the City of Sanford, Florida, Schedule C of the Land Development Regulations caps building height at 35 feet in every single-family, mobile home and agricultural district, a base of 35 feet that may rise under separate design standards in the multi-family districts, and up to 50 or 100 feet in the nonresidential districts.
Sanford Residential Building Height Limits
Some RestrictionsSanford Land Development Regulations, Schedule C; Schedule E, Section 16.0
AREA AND DIMENSION REGULATIONS SR-1AA SR-1A SR-1 SR-2 MR-1 MR-2 MR-3 RMOI RC-1 GC-2 SC-3 RI-1 MI-2 AG ... Maximum Building Height 35 35 35 35 35 (3) 35 (3) 35 (3) 50 35 50 100 50 50 35 Feet ... (3)Building heights may be increased pursuant to Schedule E, section 16.0, D. 4. ... 4.Building height. ... Buildings shall be no more than two stories on properties adjacent to single-family dwelling un...
Lot Coverage Limits
In the City of Sanford, Florida, the Land Development Regulations cap impervious surface ratio (ISR) at 50 percent of lot area in the SR-1AA, SR-1A, SR-1, MR-2 and MR-3 zoning districts, and at 60 percent for planned development (PD) projects, calculated as impervious area in square feet divided by total lot area.
Sanford Impervious Surface Ratio Caps by District
Some RestrictionsSanford Land Development Regulations, Schedule F § 5.0(B)(1)(a)-(b)
B.Calculating the impervious surface on your property. Impervious surface ratio (ISR) calculations and other information shall be provided with all applications. Calculations for the ISR shall be determined as follows:1.Impervious Area in sq. ft. / Entire Lot Area in sq. ft. = ISR ... a.No more than 50% entire lot ISR is allowed within the following zoning districts: SR-1AA, SR-1A, SR-1, MR-2, ...
Looking for Seminole County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Sanford city rules.
Building Setbacks & Zoning in Seminole County →