Skip to main content
CityRuleLookup

Taylor, TX Environmental Rules: Erosion Control (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Governing law
City Code § 25-23.1(a)(4) and (a)(7)
Adopted
Ordinance No. 2022-29, August 25, 2022
Required before digging
Silt fence, inlet protection, rock filter dams
Overnight excavations
Must have silt fencing around them
High-erosion areas
Require wire-backed silt fencing
Enforcement
Stop-work order, permit revocation for noncompliance
Applies to
Right-of-way construction, not private lot grading

Summary

Anyone building or repairing utility, water, sewer or telecom facilities in a Taylor right-of-way must install erosion control before excavation starts. City Code § 25-23.1(a)(4) requires silt fencing, inlet protection and rock filter dams plus warning signs in place before work begins, and § 25-23.1(a)(7) makes the permittee responsible for stormwater erosion control meeting city, state and federal guidelines throughout construction.

(4)Erosion control measures (e.g. silt fence, inlet protection, rock filter dams) and advance warning signs, markers, cones and barricades must be in place before work begins. ... (7)Permittee shall be responsible for stormwater management erosion control that complies with city, state and federal guidelines. Requirements shall include, but not be limited to, silt fencing around any excavation that will be left overnight, silt fencing in erosion areas until reasonable vegetation is established, barricade fencing around open holes, and high erosion areas will require wire backed silt fencing.

Full Breakdown

The City of Taylor's Right-of-Way Management Ordinance, adopted by Ordinance No. 2022-29 on August 25, 2022, governs every right-of-way user constructing, installing or repairing facilities such as water, sewer, gas, electric and telecommunications lines within city streets and easements. 1(a)(4) requires erosion control measures, including silt fence, inlet protection and rock filter dams, along with advance warning signs, markers, cones and barricades, to already be in place. 1(a)(7) for stormwater management erosion control that complies with city, state and federal guidelines: silt fencing must surround any excavation left open overnight, silt fencing must stay up in erosion-prone areas until vegetation reestablishes, open holes need barricade fencing, and areas of high erosion require wire-backed silt fencing rather than standard fabric fencing.

Permittees must furnish documentation of erosion control compliance to the city manager on request, and city staff may inspect right-of-way work at any time without notice under § 25-30. These rules sit inside a broader construction-standards section that also requires 48-hour advance notice before work starts and posted information signs every 100 feet along the work zone. Because this ordinance targets construction within the public right-of-way rather than private-lot grading, a homebuilder grading a residential lot outside city easements falls under different building or drainage rules, not this section. Failure to have erosion controls in place before work begins is treated the same as any other construction-standards violation.

Violations & Fines

Starting right-of-way construction without silt fencing, inlet protection or rock filter dams already installed violates § 25-23.1(a) and exposes the right-of-way user to a stop-work order and enforcement action under § 25-23(l). A right-of-way user who ignores the requirement on a prior permit can have new permit applications denied or saddled with added conditions under § 25-28, and the city may pursue any legal action available under the ordinance to force compliance.

Frequently Asked Questions

Does Taylor's erosion control rule apply to building a new house?
No. Section 25-23.1 governs work inside the public right-of-way, meaning utility, water, sewer and telecom construction in city streets and easements. A residential building project on private property is reviewed under Taylor's building permit and drainage standards instead, not this right-of-way ordinance.
What erosion controls does the city require before digging starts?
Section 25-23.1(a)(4) requires silt fencing, inlet protection and rock filter dams, plus warning signs, markers, cones and barricades, all in place before construction begins. If an excavation is left open overnight, wire-backed silt fencing is required in areas with high erosion potential.
What happens if a contractor skips erosion control?
The city can issue a stop-work order and pursue enforcement action under Section 25-23(l). A contractor with a history of noncompliance can also have future right-of-way permit applications denied or face additional conditions under Section 25-28.

Sources & Official References

Other rules in Taylor

All Taylor rules

Texas rules heatmap·Compare Taylor to another location·View the Texas environmental rules overview

Get notified when Erosion Control in Taylor, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Erosion Control in Nearby Cities

How other cities in Williamson County handle erosion control.

Cedar Park, TX
Some Restrictions
Round Rock, TX
Some Restrictions