Columbus, OH Fence Regulations: Height Limits (2026)

Fences or screening walls with a height greater than seven (7) feet require zoning clearance on lots with four or more dwelling units, or on non-residential lots. Fences or screening walls with a height greater than six feet require zoning clearance on lots with dwellings containing less than four units. Fences or screening walls exceeding these respective heights are subject to minimum building setback line requirements per the underlying zoning district standards.B.Fences or screening walls which alter parking lots, restrict site access, or are used to satisfy screening requirements, shall be shown on the site plan for zoning clearance regardless of the height of the fence or wall. Fences or walls may not obstruct parking spaces or maneuvering areas or encroach into required clear vision per Section 3321.05.C.Fences or screening walls not requiring zoning clearance are still subject to the underlying zoning district standards, including but not limited to, restrictions on height, construction material, and location.D.The height of the fence or screening wall is to be measured from the finished grade to the highest point. For retaining walls, the height is to be measured from the higher-grade side of the retaining wall. The height includes any attachments above the fence or wall, including but not limited to, barbed wire, razor wire, and lattice.E.The requirements for fences and walls also include gates, bollards, and pylons. (Ord. No. 2526-2025, § 1, 11-24-2025)