Hamburg Village, NY Fence Regulations: Fence Permit Requirements (2026)

Section 250-24.10 of the Village of Hamburg Code allows fences to be erected, installed or maintained in all districts, notwithstanding the yard requirements of Chapter 250, in accordance with its provisions. The first condition is procedural: a permit must first be obtained from the Village Building Inspector before any work can be started. The word first matters, because the permit is a precondition to digging post holes, not a document to file afterward.

The permitted fence must then meet the standards in the same section. Under § 250-24.10(A), its most pleasant or decorative side faces the adjoining lot or public right-of-way, with all posts in the applicant's yard unless the posts are an integral part of the decorative design. Under (B), height is three feet in a front yard area and six feet in a side or rear yard area, measured from natural grade along the line of installation. Under (C), barbed wire, spikes, chipped glass, electricity or similar materials cannot be used with any fence unless the Village Board issues a conditional use permit on one of the findings listed there. Section 250-24.7 also keeps fences and planting out of the corner-lot vision triangle and limits fences over three feet in height near driveway entrances.

Enforcement runs through § 250-18.2. The Code Enforcement Officer serves a written notice of violation and correction order, and the notice sets a 30-day correction period unless the chapter provides a different limit. Any person can file a written complaint about a violation with the Building Inspector under § 250-18.3, who records it and investigates immediately. These are Village of Hamburg rules, separate from the surrounding Town of Hamburg.