Skip to main content
CityRuleLookup

Santa Rosa County, FL Fence Regulations: Retaining Walls (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified July 2026

Key Facts

Engineering trigger (fill)
Over 48 inches unbalanced
Engineering trigger (height)
Over 24 in. resisting loads
Design standard
Accepted engineering practice
Must resist
Overturning, sliding, uplift
Code section
LDC 5.02.02.A.9

Summary

In Santa Rosa County, a retaining wall that holds back more than 48 inches of unbalanced fill, or one over 24 inches that resists lateral loads beyond soil, must be engineered to accepted standards for stability against overturning, sliding and water uplift.

These county ordinances apply to unincorporated areas of Santa Rosa County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

Retaining walls that are not laterally supported at the top and that retain in excess of 48 inches of unbalanced fill or retaining walls exceeding 24 inches in height that resist lateral loads in addition to soil, shall be designed in accordance with accepted engineering practice to ensure stability against overturning, sliding, and water uplift.

Full Breakdown

LDC section 5.02.02.A.9 requires retaining walls that are not laterally supported at the top and retain more than 48 inches of unbalanced fill, or retaining walls exceeding 24 inches in height that resist lateral loads in addition to soil, to be designed in accordance with accepted engineering practice. The design must ensure stability against overturning, sliding and water uplift. Such walls typically require a building permit and engineered plans. Smaller garden walls below these thresholds are treated like ordinary walls and fences.

Violations & Fines

An engineered retaining wall built without required design or permit is a building-code and code-enforcement violation; the county may require corrective engineering or removal.

Frequently Asked Questions

When does a retaining wall need engineering?
When it retains more than 48 inches of unbalanced fill, or exceeds 24 inches and resists lateral loads beyond soil; then it must be designed to accepted engineering practice.
What must the design prevent?
The wall must be designed to ensure stability against overturning, sliding and water uplift per LDC 5.02.02.A.9.

Sources & Official References

Other rules in Santa Rosa County

All Santa Rosa County rules

Florida rules heatmap·Compare Santa Rosa County to another location·View the Florida fence regulations overview

Get notified when Retaining Walls in Santa Rosa County, FL changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.