Skip to main content
CityRuleLookup

San Bernardino County, CA Fire Regulations: Wildfire Zones (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified June 2026

Key Facts

FHSZ levels
Moderate, High, Very High
LRA zone ordinance
Ordinance No. 4489 (adopted June 10, 2025)
Areas affected
San Bernardino Mountains, foothills, desert margins
WUI building standards
CA Building Code Chapter 7A in High/Very High zones
Defensible space
100 ft per PRC 4291
Fire Safety Overlay
Development Code Ch. 82.13 (mountain/foothill/desert)

Summary

Much of unincorporated San Bernardino County (San Bernardino Mountains, foothills, and wildland areas) lies in Moderate, High, or Very High Fire Hazard Severity Zones. The Board of Supervisors adopted Ordinance No. 4489 (June 10, 2025) designating Local Responsibility Area zones, and the County's Fire Safety Overlay (Development Code Chapter 82.13) imposes extra building standards.

City-specific rules exist: Rancho Cucamonga, Victorville, Fontana, Rialto, Ontario, Hesperia, and San Bernardino have their own wildfire zones rules that differ from San Bernardino County's county-level regulations. If you live in one of those cities, check the city-specific page instead.

What are Fire Hazard Severity Zones? The State Fire Marshal is mandated to classify lands within State Responsibility Areas into Fire Hazard Severity Zones (FHSZ). Fire Hazard Severity Zones fall into one of the following classifications: Moderate High Very High The California laws that require Fire Hazard Severity Zones include California Public Resources Code 4201-4204, California Code of Regulations Title 14, Section 1280 and California Government Code 51175-89.

Source: CAL FIRE Hazard Zone MapView official code

Full Breakdown

San Bernardino County faces extreme wildfire exposure across the San Bernardino Mountains, valley foothills, and desert margins. The California Office of the State Fire Marshal designates Fire Hazard Severity Zones (FHSZ) using three levels: Moderate, High, and Very High. On June 10, 2025, the San Bernardino County Board of Supervisors adopted Ordinance No. 4489 designating the Fire Hazard Severity Zones in the Local Responsibility Areas of the San Bernardino County Fire Protection District, matching the State Fire Marshal's updated maps; state law allows the District to increase but not decrease the State's hazard designations.

FHSZ ratings reflect ignition likelihood, fire behavior under extreme weather, historical fires, vegetation type, terrain (hills and canyons), and ember intrusion from nearby wildlands. Consequences of a mapped zone include: enhanced building standards for new construction in High and Very High zones (California Building Code Chapter 7A / Wildland-Urban Interface requirements such as ember-resistant vents, Class A roofs, and ignition-resistant exteriors) and mandatory defensible space (100 feet) under California Public Resources Code 4291. 13) covering mountain, valley-foothill, and desert areas designated as wildfire risk areas; the FS Overlay adds development standards including fuel modification, defensible space, and fire-resistant construction, and routes building/subdivision applications to the responsible fire authority for review. Property owners should check the County Fire FHSZ map viewer or the CAL FIRE FHSZ viewer to confirm their parcel's designation.

Violations & Fines

Building in a High/Very High FHSZ or FS Overlay without meeting WUI (Chapter 7A) and fuel-modification standards can trigger stop-work and certificate-of-occupancy holds by County Building & Safety and Fire. Defensible space failures under PRC 4291 are enforced through abatement and cost-recovery. FHSZ status must be disclosed in real-estate transactions under California's Natural Hazard Disclosure requirements.

Frequently Asked Questions

Is my unincorporated San Bernardino County property in a wildfire hazard zone?
Much of the county's mountains, foothills, and wildland margins are mapped Moderate, High, or Very High. Check the County Fire Fire Hazard Severity Zone map viewer or the CAL FIRE FHSZ viewer for your specific parcel. The Board adopted the Local Responsibility Area zones via Ordinance No. 4489 in June 2025.
What extra rules apply in a High or Very High zone?
New buildings must meet California Building Code Chapter 7A wildland-urban interface standards (ember-resistant vents, Class A roofs, ignition-resistant exteriors), and owners must maintain 100 feet of defensible space under Public Resources Code 4291.
What is the Fire Safety Overlay?
It is a County Development Code overlay (Chapter 82.13, established 2007) covering mountain, valley-foothill, and desert wildfire risk areas. It adds development standards such as fuel modification, defensible space, and fire-resistant construction, and requires fire-authority review of projects.

Sources & Official References

Other rules in San Bernardino County

All San Bernardino County rules

California rules heatmap·Compare San Bernardino County to another location·View the California fire regulations overview

Get notified when Wildfire Zones in San Bernardino County, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Wildfire Zones in Cities Across San Bernardino County