Bonita Springs, FL Hurricane Preparedness: Flood Elevation (2026)
Key Facts
- Rule
- Bottom of the frame at or above Florida Building Code elevation
- Zone A reference
- Florida Building Code, Residential Section R322.2
- Zone V and coastal A reference
- Florida Building Code, Residential Section R322.3
- Trigger
- Placed, replaced, or substantially improved
- Temporary RVs
- Fewer than 180 consecutive days or ready for highway use
Summary
In the City of Bonita Springs, Lee County, Florida, a new manufactured home placed, replaced or substantially improved in a flood hazard area must be elevated so the bottom of the frame is at or above the elevation the Florida Building Code requires for zone A or for zone V and coastal A zones.
All new manufactured homes that are placed, replaced, or substantially improved in flood hazard areas shall be elevated such that the bottom of the frame is at or above the elevation required, as applicable to the flood hazard area, in the Florida Building Code, Residential Section R3222.2 (zone A) or Section R322.3 (zone V and coastal A zone).
Full Breakdown
Sec. 24-93 of the Bonita Springs Code sets the elevation rule for manufactured homes in flood hazard areas. It does not print a number of feet. It ties the bottom of the frame to the elevation required in the Florida Building Code, Residential Section R3222.2 for zone A, or Section R322.3 for zone V and coastal A zones. That reference is printed with the extra 2 in the file's text.
The surrounding sections add the hurricane-season protections. Sec. 24-90 requires installation by a licensed installer under F.S. § 320.8249 and prohibits placing manufactured homes or recreational vehicles in coastal high hazard areas (zone V) and coastal A zones, except in an existing park or subdivision. A replacement home can go on a lot in an existing park only if the anchoring standards of Sec. 24-92 and the elevation standards of Sec. 24-93 are met, and new or expanded parks and subdivisions are prohibited. Sec. 24-91 requires permanent, reinforced foundations designed under Section R322.2 in zone A and Section R322.3 in zone V and coastal A zones. Sec. 24-92 requires anchoring to resist flotation, collapse or lateral movement, in addition to wind-resistance anchoring. Sec. 24-94 sends enclosed areas below elevated homes to Section R322 of the Florida Building Code, Residential, and Sec. 24-95 does the same for utility equipment.
Recreational vehicles are treated differently. Under Sec. 24-98, an RV or park trailer placed temporarily must be on the site for fewer than 180 consecutive days, or be fully licensed and ready for highway use, on wheels or a jacking system, attached only by quick-disconnect utilities, with no permanent additions, rooms, stairs, decks or porches. Otherwise Sec. 24-99 applies the manufactured home rules. Sec. 24-4 warns that larger floods can and will occur.
Violations & Fines
Sec. 24-71 makes development that lacks a permit or does not comply with Chapter 24 a violation, and a building without documentation of the lowest floor elevation is presumed a violation until documentation is provided. The floodplain administrator can serve notices of violation or stop work orders under Sec. 24-72, and continued work draws penalties as prescribed by law under Sec. 24-73.
Frequently Asked Questions
How high must a manufactured home be elevated in Bonita Springs?
Can I place a manufactured home in a coastal high hazard area?
What foundation does a manufactured home in a flood area need?
How long can an RV stay in a flood hazard area?
Sources & Official References
Other rules in Bonita Springs
Florida rules heatmap·Compare Bonita Springs to another location·View the Florida hurricane preparedness overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Flood Elevation in Nearby Cities
How other cities in Lee County handle flood elevation.