Brevard County, FL Parking Rules: Loading Zones (2026)
Key Facts
- Minimum berth size
- 14 ft by 30 ft, 14 ft clearance
- Street frontage
- Banned in commercial/industrial zoning categories
- Berths required
- 1 per 15,000-25,000 sq ft, up to 5
- Scope
- Governs unincorporated Brevard only
Summary
Brevard County requires off-street loading berths sized 14 by 30 feet, bans loading docks on street-facing frontages in commercial and industrial zones, and scales the number of required berths to building size.
(2)Loading spaces or berths shall have minimum dimensions of 14 by 30 feet and a height of not less than 14 feet. Service alleys or driveways shall have a minimum width of 20 feet. In addition, the loading zone shall be designed and constructed in accordance with the exhibits.(3)Loading facilities and truck parking are prohibited on street frontages in the commercial zoning categories and in a planned business park (PBP) or planned industrial park (PIP) classification.(4)Loading facilities and truck parking shall be located to the side or at the rear of the most forward structures and shall be paved and have adequate drainage and shall be maintained in good condition.(5)Loading facilities shall be designed and constructed to allow all maneuvering of trucks and other vehicles on site and preclude backing directly into a public street or utilizing public right-of-way.(6)The following requirements for loading spaces or berths and truck parking areas shall apply to all commercial and industrial zones:a.A minimum number of loading spaces or berths shall be provided and maintained as follows: Size of Building or Structure (square feet) Number of Spaces or Berths
Over 15,000 but not over 25,000 1 Over 25,000 but not over 60,000 2 Over 60,000 but not over 120,000 3 Over 120,000 but not over 200,000 4 Over 200,000 but not over 290,000 5
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 135).
Full Breakdown
Under the county's Land Development Regulations, every new or expanded commercial and industrial building in unincorporated Brevard must provide off-street loading berths at least 14 feet wide by 30 feet long with 14 feet of vertical clearance, plus 20-foot-wide service alleys. Loading docks and truck parking cannot front a public street in commercial zoning categories or in a planned business park or planned industrial park classification: they must sit to the side or rear, paved, with drainage. Buildings over 15,000 square feet must provide at least one berth, scaling up to five berths past 200,000 square feet. Palm Bay, Melbourne, Titusville, Cocoa and other Space Coast cities enforce their own separate loading standards.
Violations & Fines
Non-compliant loading design blocks certificate-of-occupancy issuance; the county manager can refuse to approve a site plan or certificate of completion until loading facilities meet these dimensional and placement standards.
Frequently Asked Questions
Does this loading zone rule apply inside Melbourne or Palm Bay?
How big must a commercial loading berth be in Brevard County?
Can a business put its loading dock facing the street?
Sources & Official References
Other rules in Brevard County
Florida rules heatmap·Compare Brevard County to another location·View the Florida parking rules overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.