Skip to main content
CityRuleLookup

Melbourne, FL Parking Rules: Loading Zones (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Minimum loading bay
14 ft x 25 ft, 15-ft clearance
Large business bay (30,000+ sf)
14 ft x 50 ft
Quiet hours near residential
10:00 p.m. to 6:00 a.m.
Buffer for temporary parking exception
250 feet from residential property
Backing into street
Prohibited

Summary

Melbourne requires manufacturing, storage, wholesale, retail, hotel and similar uses to provide dedicated off-street loading space at least 14 by 25 feet under Sec. 9.76, scaled up by gross floor area. Where a loading area abuts residential property, loading and unloading is barred from 10:00 p.m. to 6:00 a.m.

Sec. 9.76. - Off-street loading area requirements. (a)General. On the same premises with every building, or part thereof, erected and occupied for manufacturing, storage, warehouse, goods display, department store, wholesale store, market, hotel, hospital, mortuary, laundry, dry cleaning, or other uses similarly involving the receipt or distribution of vehicles, materials or merchandise, there shall be provided and maintained on the lot adequate space for standing, loading and unloading service vehicles... (e)Loading areas adjacent to residential property. When designated loading areas or other vehicular use areas used for loading/unloading, staging or queuing of vehicles abut residentially zoned or used property, no parking, loading or unloading of vehicles shall occur between the hours of 10:00 p.m. and 6:00 a.m. Temporary parking of such vehicles may occur on-site during these hours in areas adjacent to public right-of-way and which are at least 250 feet from any residentially zoned or used property(s).

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 32).

Full Breakdown

Sec. 76(a) requires manufacturing, storage, warehouse, goods display, department store, wholesale, market, hotel, hospital, mortuary, laundry and dry cleaning uses, or any similar use that receives or distributes vehicles, materials or merchandise, to provide and maintain adequate on-site space for standing, loading and unloading service vehicles, so trucks do not interfere with public streets, alleys or off-street parking access aisles. Sec. 76(c) sets the minimum bay at 14 feet wide by 25 feet long with 15-foot height clearance, rising to 14 by 50 feet for individual businesses over 30,000 square feet, and requires the bays to be paved.

The number of spaces scales with gross floor area: none under 5,000 square feet, one space from 5,000 to 19,999 square feet, one space plus one per additional 40,000 square feet up to 99,999 square feet, three spaces plus one per additional 60,000 square feet up to 399,999 square feet, and eight spaces plus one per additional 80,000 square feet above 400,000 square feet. Sec. 76(d) prohibits backing directly into a public street, requires all truck maneuvering to occur on-site, and bars counting required parking spaces as loading spaces.

Sec. , though temporary parking is allowed during those hours if it is at least 250 feet from residential property and near the public right-of-way.

Violations & Fines

Loading, unloading or staging trucks between 10:00 p.m. and 6:00 a.m. next to residential property violates Sec. 9.76(e) unless the vehicle is temporarily parked at least 250 feet from the residential property near the right-of-way. Backing a truck directly into a public street to load or unload, rather than maneuvering entirely on-site, violates Sec. 9.76(d) and can be cited by code compliance under the enforcement provisions of Chapter 56 of the City Code.

Frequently Asked Questions

What size loading space must a Melbourne business provide?
Sec. 9.76(c) requires a minimum loading and unloading space of 14 feet wide by 25 feet long with 15-foot height clearance, growing to 14 by 50 feet for individual businesses larger than 30,000 square feet.
Can trucks load or unload at night next to a Melbourne neighborhood?
No. Sec. 9.76(e) prohibits loading, unloading or staging vehicles between 10:00 p.m. and 6:00 a.m. where the loading area abuts residentially zoned or used property, unless the vehicle is parked at least 250 feet away near the right-of-way.
How many loading spaces does a 50,000-square-foot building need in Melbourne?
Under the Sec. 9.76(c) table, a building of that size falls in the 20,000-99,999 square-foot tier, requiring one loading space plus one additional space for each 40,000 square feet over 20,000 square feet.

Sources & Official References

Other rules in Melbourne

All Melbourne rules

Florida rules heatmap·Compare Melbourne to another location·View the Florida parking rules overview

Get notified when Loading Zones in Melbourne, FL changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Loading Zones in Nearby Cities

How other cities in Brevard County handle loading zones.

Palm Bay, FL
Some Restrictions
Cocoa, FL
Some Restrictions
Titusville, FL
Some Restrictions