Skip to main content
CityRuleLookup

Taylor, MI Sign Regulations: Freeway-Facing Signs (2026)

Significant Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Districts allowed
I-1 and I-2 only
Orientation
Must face I-94 highway
Max size
300 sq ft/face, 2 faces
Setback from ROW
50 feet
Spacing between billboards
1,000 lineal feet
Buffer from parks/schools/residential
200 feet
Review required
Planning commission site plan review

Summary

Billboards in the City of Taylor, Michigan must sit on a lot adjacent to and facing the I-94 highway, and are only permitted in the I-1 and I-2 industrial districts under Section 18.06(b)(2) of the zoning ordinance. Planning commission site plan review is required, and boards must stay at least 200 feet from any park, school, church or residential district.

Billboards I-1 and I-2 districts Yes As established for buildings in the zoning district; however, 45 ft. if in a district adjacent to interstate, Bottom shall be at least 15 ft. from ground if within 4 ft. of any surface serving automobiles 300 sq. ft. per sign face, max. of 2 sign faces — section 18.06(b)(2) ... (2)Billboards.a.Billboards shall be located on a lot adjacent to and face the I-94 highway.b.Billboards shall be located at least 200 feet from any park, playground, school, church and residential district or use.c.Billboards shall be located at least 50 feet from the street right-of-way.d.Billboards shall be separated by a minimum of 1,000 lineal feet along freeways and streets having a right-of-way of 120 feet or more in width. The spacing requirements apply to signs on either side of the street and shall be measured parallel to the right-of-way.e.The applicant must demonstrate that they have obtained all permits required by the state.f.Site plan review is required in accordance with article 19, site plan review.

Full Breakdown

Section 18.06(b)(2) of the Taylor Zoning Ordinance restricts billboards to lots that face I-94, the freeway that runs through the city's east side near Detroit Metro Airport. Billboards are limited to the I-1 and I-2 industrial districts, capped at 300 square feet per face with a maximum of two faces, and must sit back at least 50 feet from the street right-of-way. Height follows the standard for buildings in the district, except a board rises to 45 feet where it sits adjacent to the interstate, and the bottom of the sign must clear at least 15 feet from the ground if it is within 4 feet of a surface serving automobiles.

Spacing is strictly controlled: billboards must sit at least 1,000 lineal feet apart along freeways and streets with a right-of-way of 120 feet or more, measured on either side of the street. A billboard cannot be placed within 200 feet of a park, playground, school, church, or residential district or use, and the applicant must obtain all state permits and go through planning commission site plan review under Article 19 before construction, per Table 19.02.

Violations & Fines

Erecting a billboard that does not face I-94, sits outside the I-1 or I-2 districts, comes within 1,000 feet of another billboard, or skips planning commission site plan review violates Section 18.06(b)(2) and Table 19.02 of the zoning ordinance. The Development Services Department enforces sign compliance under Section 18.08, and violations are municipal civil infractions under Section 25.10, punishable by a fine of up to $500.00 per day.

Frequently Asked Questions

Where in Taylor can a billboard be built?
Only in the I-1 and I-2 industrial districts, and only on a lot that is adjacent to and faces the I-94 highway, per Section 18.06(b)(2) of the zoning ordinance. Planning commission site plan review is required before construction.
How far apart do billboards have to be in Taylor?
At least 1,000 lineal feet along freeways and streets with a right-of-way of 120 feet or more, measured on either side of the street, under Section 18.06(b)(2). Billboards must also stay 200 feet from any park, school, church or residential district.
How tall can a billboard be along I-94 in Taylor?
Height follows the standard for buildings in the I-1 or I-2 district, except it rises to 45 feet where the billboard sits adjacent to the interstate, per Section 18.06(b)(2). The bottom must clear at least 15 feet where it is within 4 feet of a road surface.

Sources & Official References

Other rules in Taylor

All Taylor rules

Compare Taylor to another location·View the Michigan sign regulations overview

Get notified when Freeway-Facing Signs in Taylor, MI changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Freeway-Facing Signs in Nearby Cities

How other cities in Wayne County handle freeway-facing signs.

Detroit, MI
Heavy Restrictions