Santa Clara County, CA Swimming Pools & Spas: Fencing & Safety Requirements (2026)
Key Facts
- Required features
- At least 2 of 7 (HSC 115922)
- Door device
- Self-latch release ≥ 54 inches high
- Exit alarms
- On doors with direct pool access
- Suction outlets
- Anti-entrapment grates (ANSI/APSP-16)
- Inspection
- Building official before final approval
Summary
Residential pools and spas must meet California's Swimming Pool Safety Act. When a building permit issues for a new or remodeled single-family pool or spa, the owner must install at least two of seven drowning-prevention features, and new pools need anti-entrapment suction outlet covers.
When a building permit is issued for the construction of a new swimming pool or spa or the remodeling of an existing swimming pool or spa at a private single-family home, the respective swimming pool or spa shall be equipped with at least two of the following seven drowning prevention safety features: (1) An enclosure that meets the requirements of Section 115923 and isolates the swimming pool or spa from the private single-family home. (2) Removable mesh fencing that meets the ASTM International F2286 standard in conjunction with a self-closing, self-latching gate. (3) A safety pool cover meeting the ASTM International F1346-23 standard.
Full Breakdown
Drowning-prevention rules for private pools in unincorporated Santa Clara County come from California Health and Safety Code Section 115922. Whenever a building permit is issued for the construction of a new pool or spa, or the remodeling of an existing one, at a private single-family home, the pool or spa must be equipped with at least two of seven safety features: (1) an isolating enclosure meeting Section 115923; (2) removable mesh fencing meeting ASTM F2286 with a self-closing, self-latching gate that can accommodate a key-lockable device; (3) an approved safety pool cover; (4) exit alarms on the home's doors that provide direct access to the pool or spa; (5) a self-closing, self-latching device on those doors with a release mechanism placed no lower than 54 inches above the floor; (6) a pool alarm that sounds on unauthorized entry into the water; or (7) other protection providing equal or greater safety.
The law does not allow both features to be located on the same door. Before issuing final approval, the local building official inspects the required features. New pools must also have anti-entrapment grates meeting the ANSI/APSP-16 performance standard designated by the federal Consumer Product Safety Commission. J).
Violations & Fines
Failing to install at least two qualifying safety features, or omitting anti-entrapment suction covers on a new pool, prevents final inspection approval and exposes the owner to liability for drowning or entrapment hazards.
Frequently Asked Questions
What safety features does a new residential pool need?
Are anti-entrapment drain covers required?
Sources & Official References
Other rules in Santa Clara County
California rules heatmap·Compare Santa Clara County to another location·View the California swimming pools & spas overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.