Skip to main content
CityRuleLookup

Temple, TX Swimming Pools & Spas: Fencing & Safety Requirements (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Residential barrier height
60 inches minimum
Public pool barrier height
72 inches minimum
Pool setback
5 ft from side/rear lines
Governing code
2015 IntI Swimming Pool & Spa Code, as amended

Summary

Temple requires a 60-inch barrier around residential pools and 72 inches for public pools, enforced under the city's amended swimming pool code.

The top of the barrier shall be not less than 72 inches (1,830 mm) above grade where measured on the side of the barrier that faces away from a public pool or spa. The top of the barrier shall not be less than 60 inches (1,524 mm) above grade where measured on the side of the barrier that faces away from a residential pool or spa.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Reformat).

Full Breakdown

Temple adopts the 2015 International Swimming Pool and Spa Code with local amendments in Chapter 7, Article VIII of the City Code. The city raised the base barrier height beyond the model code's default: the top of any barrier around a residential pool or spa must be at least 60 inches above grade, and 72 inches for a public pool or spa, measured on the side facing away from the water. These heights must run the entire perimeter of the barrier and extend 36 inches horizontally outward from it. An onground pool wall itself can serve as the barrier only if its bottom sits on grade, its top is at least 60 inches above grade around the full perimeter, and it otherwise meets the Sec. 305.2 barrier standard.

Violations & Fines

Building Official enforcement under the adopted Swimming Pool Code; noncompliant barriers block pool permit approval and final inspection sign-off.

Frequently Asked Questions

How tall must a pool fence be in Temple?
At least 60 inches above grade for a residential pool, or 72 inches for a public pool, per Temple's amended Swimming Pool Code.
Can the pool wall itself count as the barrier?
Yes, if it's at least 60 inches tall on grade around the full perimeter and the manufacturer allows the wall to serve as a barrier.

Sources & Official References

Other rules in Temple

All Temple rules

Texas rules heatmap·Compare Temple to another location·View the Texas swimming pools & spas overview

Get notified when Fencing & Safety Requirements in Temple, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Fencing & Safety Requirements in Nearby Cities

How other cities in Bell County handle fencing & safety requirements.

Killeen, TX
Some Restrictions