Skip to main content
CityRuleLookup

Thousand Oaks, CA Building Safety: Building Permits (2026)

Heavy Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Required roof class
Class A for all types of construction, citywide
Class B/C roofs
No longer permitted anywhere in the city
Wood shingles/shakes
Must also meet Class A even if fire-retardant treated
General penalty
Up to $1,000 fine and/or 6 months jail per § 8-1.23; each day is a separate offense

Summary

Thousand Oaks requires Class A roof coverings on all new construction citywide, not just in designated wildfire zones, by deleting the California Building Code's normal allowance for lower-rated Class B and C roofs. Fire-retardant treated wood shingles and shakes are likewise restricted to Class A only.

Section 1505.1 “General” is amended by removing the reference to Class B and C roof assemblies and roof coverings. Table 1505.1 “Minimum Roof Covering classification for Types of Construction” is amended as follows: For all types of construction, the Minimum Roof Covering Classification is Class A. Section 1505.1.2 “Roof covering within all other areas” is amended by changing the reference from Class C to Class A. ... Section 1505.6 “Fire-retardant treated wood shingles and shakes” is amended by removing the reference to Class B and C roof assemblies and roof coverings. Only Class A roof are allowed.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: 2026 S-78: 2026 S-78 Supplement contains: Current city legislation passed through March 31, 2026).

Full Breakdown

The amendment strikes references to Class B and C roof assemblies from Building Code Section 1505.1 and its companion table, and changes Section 1505.1.2 so that roof coverings 'within all other areas' of the city must also be Class A (previously Class C was allowed in some areas). Sections 1505.3 through 1505.5 of the state code, which set out separate standards for lower fire-classification roofs, are deleted outright, leaving Class A as the only permitted roof covering classification for any type of construction in the city.

Violations & Fines

Roofing work that doesn't meet the Class A requirement violates the Building Code; under § 8-1.23, violations are punishable by a fine of up to $1,000, up to 6 months in county jail, or both, with each day of a continuing violation treated as a separate offense.

Frequently Asked Questions

Can I re-roof my Thousand Oaks house with a Class C shingle?
No. The City deleted the Building Code's Class B and C options entirely: only Class A roof coverings are allowed, for any type of construction anywhere in the city.
Does this only apply in designated fire hazard zones?
No: this Class A requirement in § 8-1.14 applies citywide, separate from the additional Wildland-Urban Interface Code requirements that apply specifically in Fire Hazard Severity Zones.

Sources & Official References

Other rules in Thousand Oaks

All Thousand Oaks rules

California rules heatmap·Compare Thousand Oaks to another location·View the California building safety overview

Get notified when Building Permits in Thousand Oaks, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Building Permits in Nearby Cities

How other cities in Ventura County handle building permits.

Ventura, CA
Some Restrictions
Moorpark, CA
Some Restrictions
Simi Valley, CA
Some Restrictions
Oxnard, CA
Some Restrictions
Camarillo, CA
Some Restrictions