Skip to main content
CityRuleLookup

Chino, CA Building Safety: Door Locking Hardware (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Deadbolt
1-inch minimum bolt throw
Exterior doors
Solid-core, 1¾ in. min.
Applies to
New residential construction
Adopted
Ord. 2022-015, 7-19-2022

Summary

New residential buildings in Chino must use solid-core exterior doors with one-inch deadbolt locks equipped with steel inserts and free-turning cylinder guards, under the city's security and safety standards for construction.

A.Doors shall comply with the following regulations:1.All exterior swinging doors shall be of solid core construction with a minimum thickness of one and three-fourths inches, or with panels not less than nine-sixteenths inch thick.2.Any swinging door leading from a garage into a residence, shall be of solid core construction with a minimum thickness of one and three-eighths inches.3.All swinging exterior doors and doors leading from garage areas into dwellings shall be equipped with a one-inch deadbolt locking mechanism. The deadbolt shall have a minimum bolt throw of one-inch and shall be equipped with a steel insert and a free turning cylinder guard. EXCEPTION. Exterior swinging doors leading into garages have a minimum requirement to be equipped with a dead latch locking mechanism.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 38).

Full Breakdown

Chino Municipal Code § 15.48.070(A), adopted by Ord. 2022-015 (7-19-2022), sets residential door-hardware standards on top of the general standards in § 15.48.060. Exterior swinging doors must be solid-core construction at least 1¾ inches thick (or panels at least 9/16 inch), and all swinging exterior doors and garage-to-house doors must carry a one-inch deadbolt lock with a minimum one-inch bolt throw, a steel insert, and a free-turning cylinder guard. Companion rules in the same section require a keyless main entrance, non-removable hinge pins, and a 180-degree door viewer on front doors. Commercial and industrial buildings follow a separate standard at § 15.48.080.

Violations & Fines

Failure to meet these standards blocks final inspection and certificate of occupancy under § 15.48.130; the building official won't sign off until the required hardware is installed.

Frequently Asked Questions

What kind of lock does Chino require on exterior doors?
A one-inch deadbolt with a minimum one-inch bolt throw, steel insert, and free-turning cylinder guard, per Chino Municipal Code § 15.48.070.
Do these hardware rules apply to existing homes?
They apply to new construction and additions under Title 15's security chapter; commercial and industrial buildings follow a separate standard at § 15.48.080.

Sources & Official References

Other rules in Chino

All Chino rules

California rules heatmap·Compare Chino to another location·View the California building safety overview

Get notified when Door Locking Hardware in Chino, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Door Locking Hardware in Nearby Cities

How other cities in San Bernardino County handle door locking hardware.

Rialto, CA
Some Restrictions
Ontario, CA
Some Restrictions