Pacifica, CA Building Safety: Door Locking Hardware (2026)

Chapter 27, Security of Buildings, sets minimum hardware standards the Building Division applies to building permit applications filed after the ordinance's 1988 effective date, including condo conversions and buildings that change occupancy group. 201 governs single-family dwelling exterior doors. Subsection (a) requires solid-core doors, or panels at least nine-sixteenths of an inch thick, built to Uniform Building Code Chapter 33 specifications. Subsection (b) requires deadbolts in addition to deadlocking latches, and for other occupancies requires that both the deadbolt and the deadlocking latch retract with a single action of the inside door knob; double-keyed, double-cylinder deadbolt locks are flatly not permitted.

Subsection (c) requires main or front entry doors to give the occupant a view of the area immediately outside without opening the door, through a door viewer with a field of view of at least 180 degrees, windows, or view ports. The section also regulates glazing near locks, strike plate shimming and screw sizes, non-removable exterior hinge pins, and mail slot openings capped at twenty-four square inches and kept at least three feet from any locking device. 204 extend parallel, more detailed hardware standards to sliding glass doors, windows and garage-type doors. on weekdays.