Baldwin Park, CA Building Safety: Electrical Permits (2026)

Baldwin Park Municipal Code § 150.150 adopts "the 2025 California Electrical Code, Part 3 of Title 24 of the California Code of Regulations" as "the primary electrical code of the city," known locally as the Baldwin Park Electrical Code, with a copy on file at the City Clerk's office. Because § 150.060 requires a permit for any building service equipment regulated by the technical codes, most electrical installation, alteration, and repair work needs a permit unless it falls under the exemptions in § 150.065, which include repairing or replacing lamps and connecting approved portable equipment to a permanently installed receptacle; reinstalling attachment plug receptacles (but not the outlets); replacing overcurrent devices of the same capacity in the same location, except service equipment; taping joints; removing wiring; temporary wiring for stage sets or laboratory experiments; wiring under 25 volts and 50 watts outside hazardous locations; and Class II/III low-energy control and signal circuits.

Section 150.151 separately requires a permit for temporary wiring at carnivals, circuses, film shoots, and similar events, and § 150.152 requires temporary construction wiring to be removed immediately after the work it served is complete, with the main service barred from energizing temporary lighting. Local amendments at § 150.154 add Article 300.5.1, requiring branch circuits and feeders serving an accessory or auxiliary building to be placed underground. A conditional electrical service connection may be authorized under § 150.153 at the Building Official's discretion.