Skip to main content
CityRuleLookup

Matanuska-Susitna Borough, AK Building Safety: Electrical Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Governing section
MSB § 8.45.010(A)(4)
Adopted code
National Electrical Code (8 AAC 70.025)
Inspector standard
Must meet state law requirements
Applies to
Electrical installations within the borough

Summary

Electrical work in the borough is governed by the National Electrical Code, adopted by reference under MSB § 8.45.010(A)(4) via 8 AAC 70.025. MSB § 8.45.020 further requires that anyone inspecting electrical installations for the borough meet the requirements of state law.

These county ordinances apply to unincorporated areas of Matanuska-Susitna Borough. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

(4) National Electrical Code, as adopted by 8 AAC 70.025; ... An inspector making inspections of plumbing or electrical installations for the borough shall meet the requirements of state law.

Full Breakdown

025, as one of the borough's codes for the regulation of buildings and structures constructed, improved, or modified within the borough. 025's adopted NEC edition carries into the borough's own requirement without a separate borough ordinance amendment. 45. Electrical work is grouped with the borough's other adopted construction codes, including the International Building Code, International Mechanical Code, Uniform Plumbing Code, International Fire Code, and International Fuel and Gas Code, all adopted in the same subsection. 030, with a hearing on 30 days' notice to the owner and at least 30 more days to remove or repair before the borough acts. 45's general enforcement and penalty scheme.

Violations & Fines

Electrical work that fails to meet the adopted National Electrical Code under MSB § 8.45.010(A)(4), or is inspected by someone who does not meet the state-law inspector requirement in MSB § 8.45.020, is a violation of Chapter 8.45, an infraction with remedies and penalties consistent with MSB Chapter 1.45. Unsafe electrical conditions rising to a fire hazard can also trigger condemnation proceedings under MSB § 8.45.030.

Frequently Asked Questions

What electrical code applies in Matanuska-Susitna Borough?
The National Electrical Code, adopted by reference in MSB § 8.45.010(A)(4) as it is adopted by the state under 8 AAC 70.025. The borough has not written its own separate electrical code; it ties directly to the state's adopted NEC edition.
Who is qualified to inspect electrical work for the borough?
MSB § 8.45.020 requires that an inspector making inspections of electrical installations for the borough meet the requirements of state law. The borough code does not set out a separate local certification standard beyond that state-law requirement.
What happens if electrical work in the borough is unsafe?
A building presenting a fire or health hazard because of unsafe conditions, including electrical ones, can be condemned under MSB § 8.45.030 after a hearing on 30 days' notice to the owner, who then gets at least 30 more days to fix or remove it before the borough steps in.

Sources & Official References

Other rules in Matanuska-Susitna Borough

All Matanuska-Susitna Borough rules

Compare Matanuska-Susitna Borough to another location·View the Alaska building safety overview

Get notified when Electrical Permits in Matanuska-Susitna Borough, AK changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.