Colonie, NY Building Safety: Building Inspections (2026)
Key Facts
- Governing section
- Town Code § 62-18
- Inspection stages
- 10 listed, incl. footing, framing, final
- Who notifies
- Permit holder notifies Building Dept. Manager
- Non-1-2-family buildings
- Architect/engineer must file progress reports
- Penalty for noncompliance
- Up to $500 fine or 15 days jail
Summary
Town Code § 62-18 lists every stage of construction the Building Department Manager must inspect before work can proceed, from footing and foundation through framing to the final inspection, and requires permit holders to keep work exposed and notify the Manager when each stage is ready.
Elements of work to be inspected. The following elements of the construction process shall be inspected, where applicable: (1) Work site delineated in the building permit; (2) Footing and foundation; (3) Preparation for concrete slab; (4) Framing; (5) Building systems, including underground and rough-in; (6) Fire-resistant construction; (7) Fire-resistant penetrations; (8) Solid-fuel-burning heating appliances, chimneys, flues or gas vents; (9) Energy Code compliance; and (10) A final inspection after all work authorized by the building permit has been completed.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4902401; v37 updated 2026-05-28; through 05-28-2026).
Full Breakdown
Section 62-18 of the Town of Colonie Code governs every building inspection tied to a permit issued under Chapter 62. Subsection A requires that "work shall remain accessible and exposed until inspected and accepted by the Building Department Manager," and puts the burden on the permit holder to notify the Manager once a stage is ready. Subsection B lists the ten elements of construction that must be inspected where applicable: the work site as delineated in the permit, footing and foundation, preparation for a concrete slab, framing, building systems including underground and rough-in work, fire-resistant construction, fire-resistant penetrations, solid-fuel-burning heating appliances and chimneys or flues, Energy Code compliance, and a final inspection once all authorized work is done.
If an inspection turns up noncompliant work, Subsection C requires it to "remain exposed until such work shall have been brought into compliance," reinspected, and found satisfactory. " Fees for inspections are set by Town Board resolution under § 62-19, and a permit that lapses without work commenced within six months, or a residential permit not completed within 12 months, becomes invalid under § 62-17B, closing off further inspections until it is renewed.
Violations & Fines
Work that proceeds past an inspection point without approval, or that is covered up before the Building Department Manager signs off, is treated as noncompliant construction under Chapter 62. The Manager can issue a stop-work order under § 62-21, and § 62-26 exposes a knowing violator to an appearance ticket, a fine of up to $500 or 15 days in jail, or a civil penalty of up to $500 per day the condition continues.
Frequently Asked Questions
What construction stages does Colonie require inspected?
Who has to call for an inspection?
Does a commercial project need extra inspection steps?
What if inspected work fails to comply?
Sources & Official References
Other rules in Colonie
New York rules heatmap·Compare Colonie to another location·View the New York building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Building Inspections in Nearby Cities
How other cities in Albany County handle building inspections.