Skip to main content
CityRuleLookup

Bayonne, NJ Building Safety: Plumbing Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Reviewing official
Plumbing Subcode Official under the Construction Agency
Standard fixture fee
$30 per fixture (sink, tub, toilet)
Water heater/gas piping fee
$85 each
Six-inch sewer connection
$300
Minimum permit fee
$100 if calculated total is lower

Summary

In the City of Bayonne, plumbing work is permitted under the Construction Agency's Uniform Construction Code process, with Section 15-3.1c pricing the plumbing permit by fixture and system. A gas piping or water heater installation runs $85, a sewer connection ranges from $80 for a four-inch line to $300 for a six-inch line, and most individual fixtures cost $30 each.

c. Plumbing Subcode Fees: 1. Water heaters - $85. ... ... 6. Gas piping - $85. ... ... 30. Sewer Connection: Four inch - $80. Five inch - $135. Six inch - $300. 31. Water service connection - $85. 32. Gas service connection - $85.

Full Breakdown

Bayonne folds plumbing work into the same Uniform Construction Code permit structure the Construction Agency administers under Section 15-1.1, with a Plumbing Subcode Official reviewing applications alongside the Building, Electrical, and Fire Protection Subcode Officials. Section 15-3.1c lays out an itemized plumbing fee schedule covering nearly every fixture and connection type: water heaters, gas piping, backflow preventers over three-quarters of an inch, and active solar systems each run $85, while individual fixtures such as a water closet, lavatory, shower, sink, or hose bibb are charged $30 apiece.

Larger systems scale with size: a sewer connection costs $80 for a four-inch line, $135 for a five-inch line, and $300 for a six-inch line, and boilers above 200,000 BTU run $100. Commercial plumbing work carries higher rates for some items, such as a $75 commercial dishwasher connection against $30 for a residential one, and an interceptor or separator installed for commercial use costs $100 versus $30 residentially. As with the other subcodes, the full itemized fee must be paid before the Construction Official issues the permit, and a minimum $100 fee applies under Section 15-3.1g whenever the calculated total falls short of that floor.

Violations & Fines

Installing or altering plumbing covered by Section 15-3.1c's fee schedule, from a new gas line to a sewer connection, without first obtaining the Plumbing Subcode permit draws the Uniform Construction Code fine for unpermitted work under Section 15-3.1, on top of the unpaid fee. Chapter 1's Section 1-5.1 sets the backstop penalty at up to a $1,250 fine or 90 days where no specific plumbing penalty applies.

Frequently Asked Questions

How much does a plumbing permit cost in Bayonne?
Section 15-3.1c prices plumbing permits by fixture and system: $30 for most individual fixtures like a sink or toilet, $85 for a water heater or gas line, and up to $300 for a six-inch sewer connection.
Who issues plumbing permits in Bayonne?
The Plumbing Subcode Official, part of the Construction Agency established under Section 15-1.1 for New Jersey's Uniform Construction Code, reviews and issues plumbing permits alongside the Building, Electrical, and Fire Protection Subcode Officials.
Is there a minimum plumbing permit fee?
Yes. Section 15-3.1g sets a $100 minimum fee for any construction permit application, including plumbing-only work, whenever the itemized subcode fees add up to less than that amount.

Sources & Official References

Other rules in Bayonne

All Bayonne rules

Compare Bayonne to another location·View the New Jersey building safety overview

Get notified when Plumbing Permits in Bayonne, NJ changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.