Satellite Beach, FL Building Setbacks & Zoning: Setback Rules (2026)

Satellite Beach's zoning code sets minimum yard setbacks separately for each of its 11 residential and commercial districts under Chapter 30, Article IV. In the lowest-density R-1A single-family district, City Code § 30-407(d)(2) requires a 25-foot front setback, a 15-foot side interior setback, a 25-foot side corner setback, and a 25-foot rear setback; any lot backing to a conservation easement must also keep all structures and impervious surface at least 20 feet landward of the easement, with a drainage plan from a professional engineer required before a building permit issues.

The R-1, R-2, R-3, R-4 and R-5 single-family districts use a smaller 25-foot front setback but a variable side interior standard of 8 to 10 feet or 10 percent of lot frontage (whichever is greater), rising to 10 feet flat for any structure between 30 and 35 feet tall, with rear setbacks ranging from 15 to 20 feet (§§ 30-408 through 30-412). The two-family RM-1 district drops the side interior setback to seven and one-half feet. The RM-3 residential-mixed use district requires a 25-foot front, side interior and rear setback, reduced to 15 feet where the yard adjoins a commercial use, plus a five-foot landscape strip along the property perimeter (§ 30-415(d)(3)).

Side corner setbacks across the single-family districts run 20 feet, increasing to 25 feet if the garage entrance faces the street. Community Development checks proposed setbacks against a signed and sealed survey during site plan and building permit review before construction begins.