Skip to main content
CityRuleLookup

Perris, CA Building Setbacks & Zoning: Structure Height Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Max height
35 feet
Zone
R-20,000 Single-Family Residential
Min lot size
20,000 square feet
SB 9 exception
16 feet, one story

Summary

In Perris's R-20,000 single-family zone, detached homes are capped at 35 feet under Perris Municipal Code § 19.21.080(g), the standard residential height limit for the city's largest-lot district.

(g)Building height. Maximum height of 35 feet.(h)Setbacks.(1)Minimum front yard: 25 feet.(2)Maximum front yard: None.(3)Minimum side yard: Five feet for each story.(4)Minimum street side yard: Ten feet.(5)Minimum rear yard: 25 feet(i)Building separation. Minimum of ten feet between buildings on the same lot.(j)Lot frontage. Lot frontage shall be a minimum of 80 feet, unless located on a cul-de-sac. All cul-de-sac lots shall have a minimum lot width of 55 feet. (Code 1972, § 19.21.080; Ord. No. 1096, 2002; Ord. No. 1309, ch. 19.21, 7-14-2015)

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 13).

Full Breakdown

Perris zones its R-20,000 Single-Family Residential district, the city's largest-lot single-family zone, with a 20,000-square-foot minimum lot size, under Chapter 19.21. Section 19.21.080 sets the full slate of development standards for that district, and subsection (g) caps building height at 35 feet, one figure among the lot-coverage, setback, and lot-size rules in the same section. Note that SB 9 housing developments and urban lot splits on R-20,000 lots are instead limited to one story and 16 feet under Perris Municipal Code § 19.30.040(e), so a second unit added through the state SB 9 process falls under the lower cap, not this one.

Violations & Fines

Building beyond 35 feet without an approved variance or permit in the R-20,000 zone triggers a stop-work order and code enforcement citation from the Perris Building Division; non-compliant construction requires remediation or removal.

Frequently Asked Questions

How tall can a house be in Perris's R-20,000 zone?
Up to 35 feet under Perris Municipal Code § 19.21.080(g), the maximum building height for the R-20,000 Single-Family Residential zone.
Does the 35-foot limit apply to SB 9 second units?
No. SB 9 housing developments on R-20,000 lots are capped at one story and 16 feet under § 19.30.040(e), overriding the standard district height.

Sources & Official References

Other rules in Perris

All Perris rules

California rules heatmap·Compare Perris to another location·View the California building setbacks & zoning overview

Get notified when Structure Height Limits in Perris, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Structure Height Limits in Nearby Cities

How other cities in Riverside County handle structure height limits.

Corona, CA
Some Restrictions
Moreno Valley, CA
Some Restrictions
Temecula, CA
Some Restrictions
Palm Springs, CA
Some Restrictions
Murrieta, CA
Some Restrictions
Riverside, CA
Some Restrictions