Fence Regulations in Jacksonville Beach, FL (2026)
3 verified fence regulations for Jacksonville Beach, Florida, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Residential fences in Jacksonville Beach top out at six feet and must sit inside the property boundaries, with a four-foot limit in a designated front yard and a two-foot setback from the right of way. Side and rear yard fences can reach eight feet under conditions, and corner lots must keep a clear sight triangle.
Jacksonville Beach Residential Fence Height Limits
Some RestrictionsJacksonville Beach Code § 34-722(a)(2)
(2) Height. The fence height in a residential district shall be a maximum of six (6) feet and located within the property boundaries. Additionally, fences shall not be taller than four (4) feet in a designated front yard and shall be setback at least two (2) feet from the right of way. a. A fence located in a side or rear yard, except rear yards of oceanfront lots in the RS-1 zoning district, m...
Fence Permit Requirements
Every fence in Jacksonville Beach needs approval from the Planning and Development Department and a building permit, under Land Development Code § 34-722. The same section sets the materials, height and corner visibility standards the plan must meet, and it applies to all fences, residential and commercial alike.
Jacksonville Beach Fence Permit and Approval Requirement
Some RestrictionsJacksonville Beach Code § 34-722
All fences are required to receive approval by the planning and development department and submit for a building permit. All fences shall comply with section 34-720 corner visibility. ... (1) Materials. All fences in residential zoning districts shall be constructed such as pressure treated wood, composite wood, PVC wood, metal, or masonry. Barbed wire and chainlink fences are not permitted. (2...
Material Restrictions
Residential fences in Jacksonville Beach must be pressure treated wood, composite wood, PVC wood, metal or masonry, and barbed wire and chainlink fences are not permitted. Every fence also needs planning and development department approval and a building permit under Code § 34-722.
Jacksonville Beach Fence Materials and Barbed Wire Ban
Significant RestrictionsJacksonville Beach Code § 34-722(a)(1)
All fences are required to receive approval by the planning and development department and submit for a building permit. ... (1) Materials. All fences in residential zoning districts shall be constructed such as pressure treated wood, composite wood, PVC wood, metal, or masonry. Barbed wire and chainlink fences are not permitted. ... (b) Commercial fences. (1) Material; use of barbed wire. Fenc...