Fence Regulations in Margate, FL (2026)
3 verified fence regulations for Margate, Florida, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
In the City of Margate, Florida, a fence or wall on a single-family lot is limited to six feet, multi-family fences to four feet in front setbacks and six feet elsewhere, and nonresidential fences to eight feet, all measured from the grade of the property.
Fence Height Limits in Margate, FL
Some RestrictionsMargate Land Development Code § 40.702
3.Heights. All walls and fences shall be measured from the grade of the property in which they are located and only installed to the following maximum height limits:a.Single-family attached and detached dwellings.i.Six (6) feet.ii.Nonresidential use exception. A property developed with a permitted residential use may install a wall or fence to a height not to exceed eight (8) feet along any sid...
Retaining Walls
In the City of Margate, no canal retaining wall can be built without a city permit, and the plans must carry the seal of a Florida registered professional civil engineer. Permits issue only for precast reinforced concrete T-pile and slab or sheet piling walls, with the cap two feet above normal water elevation. Margate Code § 11-17 governs, with fees in § 11-18.
Margate Canal Retaining Wall Permit Rules
Some RestrictionsMargate Code § 11-17
A.Scope.(1)No canal retaining wall, or other structure, the purpose of which is to produce a vertical drop in elevation at the edge of a canal, shall be constructed within the City limits of Margate, Florida, without a permit for said construction being first obtained from the City. ... (e)The seal and signature of a professional civil engineer registered to practice in the State of Florida. .....
Material Restrictions
In the City of Margate, Florida, fences must be aluminum, chain link, stuccoed block, pre-cast concrete, molded polyethylene composite, PVC, weatherproofed wood or a similar material approved by the Development Services Director. Barbed, razor or similar wire, broken glass, plywood and sheet metal are prohibited.
Fence Material Restrictions in Margate, FL
Some RestrictionsMargate Land Development Code § 40.702
1.Permitted materials. Aluminum, chain link, concrete block covered with stucco or pre-cast concrete, molded polyethylene composite, polyvinyl chloride (PVC), weather proofed wood, or other material deemed similar by the Development Services Director. Barbed, razor or similar type wire, broken glass, plywood and sheet metal are prohibited.a.Chain link exception. Chain link or other similar styl...
Looking for Broward County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Margate city rules.
Fence Regulations in Broward County →