Sign Regulations in Margate, FL (2026)
3 verified sign regulations for Margate, Florida, sourced directly from the municipal code and official government pages.
Verified from official government sources
Political Signs
In Margate, Florida, a residential election sign is capped at 6 square feet for single-family lots and 32 square feet for multi-family. Multi-family election signs go up no earlier than 60 days before the election and come down within 48 hours after. Single-family and two-family lots get up to twelve months per year.
Margate FL Election Sign Size and Display Rules
Some RestrictionsMargate Land Development Code § 40.706
iii.Election sign:a.Area maximum: Six (6) square feet for single-family, residential; thirty-two (32) square feet for multi-family residential.b.Election signs in multi-family areas may be displayed for a maximum of sixty (60) days prior to the election and must be removed within forty-eight (48) hours after.c.Each person wishing to post signs in multi-family areas shall provide the city with a...
Digital Billboards
Margate, Florida bans billboards outright, including off-premises signs, so no digital billboard can go up in the City of Margate. Electronic message signs are allowed only for a short list of on-site uses, capped at 25 percent of the sign face with a 90 second hold between messages.
Margate FL Digital Billboard and Electronic Sign Rules
Heavy RestrictionsMargate Land Development Code § 40.706
b.Changeable copy signs: Signs displaying messages which can be or are intended to be changed by use of removable letters and numerals or electronic copy are permitted to be used only for theaters, playhouses, freestanding places of assembly, freestanding schools, drive-thru establishments, hospitals, banks, drive-thru facilities and vehicle fuel stations, subject to the regulations below:i.Ele...
Window Signs
In the City of Margate, Florida, all window signs on a storefront frontage together cannot cover more than 25 percent of the window area, glass doors included. Interior signs must sit within ten feet of the glass, exterior ones must be vinyl, and illuminated signs are limited to two at four square feet each.
Margate FL Window Sign Coverage Limits
Some RestrictionsMargate Land Development Code § 40.706
g.Window signs: The total area of all window signs (interior, exterior and illuminated) may be no greater than twenty-five (25) per cent of the total window area of each frontage, including glass doors.i.Interior window signs.a.Located within ten (10) feet of the window;b.Shall be nonilluminated.ii.Exterior window signs:a.Signs must be constructed from vinyl;b.Signs shall not be applied to or c...
Looking for Broward County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Margate city rules.
Sign Regulations in Broward County →