Fence Regulations in Melbourne, FL (2026)
4 verified fence regulations for Melbourne, Florida, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Melbourne caps residential fences at six feet, dropping to four feet in a required front yard and on the street side of a corner lot, per Sec. 9.43. A separate visibility rule in Sec. 9.45(d) bars any fence from blocking sightlines at intersections, curb cuts or railroad crossings, regardless of any permit already issued.
Melbourne Fence Height & Corner Visibility Rules
Some RestrictionsMelbourne City Code §§ 9.43(b), 9.45(d)
Sec. 9.43(b) Height of fences and walls permitted. Except as otherwise provided herein, fences and walls shall be limited to six feet in height except that fences and walls in a required front yard shall be limited to four feet in height. Fences and walls located on side-corner lots may be six feet in height except between the front building line and the street shall be limited to four feet in ...
Fence Permit Requirements
Melbourne requires a building permit before any fence or wall goes up, under Sec. 9.48, and the application must meet both the fence article and the City of Melbourne Building Code. Sec. 9.49 requires plans showing height, location, type, and construction specifications before the permit is issued.
Melbourne Fence Permit Requirements
Some RestrictionsMelbourne City Code §§ 9.48, 9.49
Sec. 9.48. - Permits required. A building permit shall be required for the construction of any fence or wall within the city. All requirements of this chapter and the City of Melbourne Building Code shall be met prior to the issuance of any such permit. ... Sec. 9.49. - Submittals. Plans must indicate the height, location and type of all fences or walls proposed, including, but not limited to, ...
Retaining Walls
Any retaining wall in Melbourne needs a building permit before construction, the same as any other fence or wall under Sec. 9.48 of the City Code. Height caps run six feet for residential walls, four feet in front yards, and ten feet for commercial, industrial and subdivision-perimeter walls, with city engineer sign-off required near a right-of-way.
Melbourne Retaining Wall Height & Permit Rules
Some RestrictionsMelbourne City Code § 9.48
A building permit shall be required for the construction of any fence or wall within the city. All requirements of this chapter and the City of Melbourne Building Code shall be met prior to the issuance of any such permit.
Material Restrictions
Melbourne bans barbed wire, concertina wire, razor wire and electrically charged fencing citywide under Sec. 9.47, with a narrow exception allowing barbed wire atop industrial-district fences for utility uses. Fences designed to injure, built of corrodible material, or fencing off a utility easement without providing access are also prohibited.
Melbourne Prohibited Fence Materials Ordinance
Significant RestrictionsMelbourne City Code § 9.47
Sec. 9.47. - Prohibited fence types and uses. (a)Barbed wire fencing. Barbed wire, concertina wire, razor wire and similar fencing is prohibited, except barbed wire may be permitted at the top of fences or walls erected in industrial zoning districts, including the M-1 and M-2 districts, for utility uses of an industrial nature.(b)Electric fences. Electrically charged fences are prohibited.(c)O...
Looking for Brevard County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Melbourne city rules.
Fence Regulations in Brevard County →