Building Setbacks & Zoning in Midwest City, OK (2026)
3 verified building setbacks & zoning rules for Midwest City, Oklahoma, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
Midwest City's zoning ordinance sets minimum front, side, and rear building setbacks for every residential district, ranging from a 30-foot front setback in the low-density A-1 district down to 20 feet in the R-MH-1 and R-MH-2 manufactured-home districts.
Midwest City Yard Setback Minimums by Zone
Some RestrictionsMidwest City Code of Ordinances, Appendix A (Zoning Regulations) § 3.2, Table 3.2-1
Minimum Front Setback 30' 30' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 20' 20' ... Minimum Rear Setback 20' or 20% of Lot Depth, whichever is smaller ... 15' 10' ... 15' 10' 10' 10'
Structure Height Limits
Midwest City caps residential building height at 35 feet in most single-family zoning districts, with several higher-density districts allowed up to 45 feet under the city's Zoning Ordinance area-regulations table.
Midwest City Residential Height Limits
Some RestrictionsMidwest City Code of Ordinances, Appendix A (Zoning Ordinance), § 3.2, Table 3.2-1
Maximum Building Height (Exceptions listed in Section 4.6) 35' 35' 35' 35' 35' 35' 35' 35' 45' 45' 45' 45' 45' 45' 45' 45', additional height shall be permitted on a ratio of one additional foot of building setback for every foot of building height above forty-five (45)'. 35' 35' Minimum Front Setback 30' 30' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 20' 20' Minimum Side Setback...
Lot Coverage Limits
Midwest City's zoning table caps building coverage and impervious surface by district, from 20% coverage and 20% impervious on A-1 estate lots up to 60% coverage and 90% impervious in the densest residential districts.
Midwest City Lot Coverage and Impervious Surface Limits
Some RestrictionsMidwest City Code of Ordinances, Appendix A — Zoning Ordinance § 3.2, Table 3.2-1
Maximum Building Coverage (i.e., Main and Accessory Buildings) 20% of Lot Area 30% of Lot Area 30% of Lot Area 40% of Lot Area 40% of Lot Area 40% of Lot Area 40% of Lot Area 50% of Lot Area 40% of Lot Area 50% of Lot Area 60% of Lot Area 60% of Lot Area 40% of Lot Area 50% of Lot Area 60% of Lot Area 60% of Lot Area 40% of Lot Area 40% of Lot Area Maximum Impervious Surface Coverage 20% of Lo...