Fence Regulations in Midwest City, OK (2026)
4 verified fence regulations for Midwest City, Oklahoma, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Midwest City limits front and side yard fences to 4 feet with at least half the fence open to view, while rear yard fences can reach 8 feet; taller, sight-proof front or side fencing needs Board of Adjustment approval.
Midwest City Privacy Fence Height and Setback Rules
Significant RestrictionsMidwest City Code of Ordinances, Appendix A (Zoning Regulations) § 5.2.3(B)
A permit must first be obtained from the City before any residential fence is constructed. ... properties are permitted to have ornamental fences up to four (4) feet in height located, placed, or erected to the front and side property lines of the residence. ... Any fence in front of the front or side building line in excess of four (4) feet must be approved, prior to its installation, by the B...
Fence Permit Requirements
Midwest City requires a permit before building any residential fence, with the fee set in the city's fee table; front and side yard fences are capped at four feet while rear yard fences can reach eight feet.
Midwest City Fence Permit Requirements
Some RestrictionsMidwest City Code of Ordinances, Appendix A (Zoning Ordinance) § 5.2.3
5.2.3. Fencing and Screening. Residential fences and walls may be erected in residential districts under the following provisions and regulations. A permit must first be obtained from the City before any residential fence is constructed. ... (D)Fees. The fee for a fence permit shall be as established in the Fee Table in Section 9-47.
Retaining Walls
Midwest City's subdivision ordinance requires retaining walls built within five feet of a property line to meet city engineer-approved design standards, use masonry or concrete, and be shown on the approved plat before construction.
Midwest City Retaining Wall Construction Rules
Some RestrictionsMidwest City Code of Ordinances §§ 38-54.2, 38-54.3(b)
This section (section 38-54) applies to all retaining walls constructed within five (5) feet of a property line or a proposed property line within a subdivision of land. ... A retaining wall shall meet city design standards. Any proposed alternative design shall be submitted to the city engineer for approval prior to its construction. All retaining walls shall be constructed from masonry or con...
Material Restrictions
Midwest City residential fences must use wood, vinyl, metal slats, wrought iron, brick, stone, chain-link, or approved ribbed steel panels; sheet metal, plastic, corrugated panels, plywood, and stockade wood posts are prohibited.
Midwest City Approved Fence Materials Rules
Some RestrictionsMidwest City Code of Ordinances, Appendix A (Zoning Ordinance) § 5.2.3(B)(3)
(3) Fence material. Fencing material must be kept in an attractive state, void of rust, in good repair, and in safe and sanitary condition at all times by the property owner... Approved fence materials in two-family and single-family districts include: wood, vinyl, and metal slats with a depth of at least five-eighths (⅝) of an inch; wrought iron or aluminum wrought iron-like fences; brick/ston...