Building Setbacks & Zoning in Roseville, MN (2026)
3 verified building setbacks & zoning rules for Roseville, Minnesota, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In Roseville's Low Density Residential district, Table 1004.09 sets a 30-foot front yard, a 30-foot rear yard, 5-foot interior side yards and 10-foot corner side yards. Reverse corner lots match the adjacent lot's front yard but not more than 30 feet. Footnotes allow porch encroachments to 22 feet and block-average front setbacks under section 1004.04.
Roseville MN Yard Setback Requirements
Some RestrictionsRoseville City Code § 1004.09(b)
Table 1004.09 One-Family Two-Family Courtyard Cottage ... Minimum ... front yard building setback 30 feet a, b Minimum side yard building setback Interior 5 feet Corner 10 feet c Reverse corner Equal to existing front yard of adjacent lot, but not greater than 30 feet Minimum rear yard setback 30 feet a See section 1004.04 . b Covered entries and porches sheltering (but not enclosing) front doo...
Structure Height Limits
Roseville caps building height at 30 feet in the Low Density Residential district under Table 1004.09, and at 35 feet in the Low to Medium Density Residential district under Table 1004.10. Detached accessory buildings are held to 15 feet with a 9-foot wall under Table 1004.02. Section 1011.07 exempts specific structures such as flagpoles and church spires.
Roseville MN Residential Building Height Limits
Some RestrictionsRoseville City Code § 1004.09(b)
(b) Dimensional standards. Specific dimensional standards developments in the LDR district are established in the table below but developments may be organized according to section 1004.05 . Table 1004.09 One-Family Two-Family Courtyard Cottage ... Maximum building height 30 feet
Lot Coverage Limits
In Roseville's Low Density Residential district, section 1004.09(c) limits the improvement area, meaning paved surfaces and building footprints, decks, pergolas and pools, to 50 percent of the parcel. Within that, impervious surface is capped at 30 percent, or 25 percent in shoreland, stormwater and wetland overlays, unless the city engineer approves more.
Roseville MN Lot Coverage and Impervious Surface Limits
Some RestrictionsRoseville City Code § 1004.09(c)
(c) Improvement area. The improvement area, including paved surfaces, the footprints of principal and accessory buildings, and other structures like decks, pergolas, pools, etc., shall be limited to 50 percent of the parcel area. ... (2) Within this improvement area limit, impervious surfaces shall be limited to 25 percent of the area within a shoreland management overlay district, or within th...
Looking for Ramsey County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Roseville city rules.
Building Setbacks & Zoning in Ramsey County →