Skip to main content

Building Setbacks & Zoning in Seaside, OR (2026)

3 verified building setbacks & zoning rules for Seaside, Oregon, sourced directly from the municipal code and official government pages.

Verified from official government sources

Setback Rules

In Seaside's R-1 low density zone, a front yard must be 20 feet, a side yard at least five feet (10 feet on the street side of a corner lot), and a rear yard at least 15 feet, with accessory buildings allowed within five feet of the rear line. Other zones in Zoning Ordinance 83-10 print their own yards.

Seaside R-1 Yard Setback Requirements

Some Restrictions

Seaside Zoning Ordinance § 3.025(3)-(5)

Section 3.025 Standards. ... In the R-1 Zone the following standards shall apply: ... 3. Front Yard: A front yard shall be 20 feet. 4. Side Yard: A side yard shall be at least five feet except on corner lots, a side yard abutting the side street shall be at least 10 feet. 5. Rear Yard: A rear yard shall be at least 15 feet, except accessory buildings may extend to within five feet of a rear pro...

Structure Height Limits

In Seaside's R-1 low density zone the maximum height of a structure is 35 feet. Zoning Ordinance 83-10 raises the cap to 45 feet in the R-3, Resort Residential and C-3 zones and to as much as 90 feet near the Prom in the C-2 zone, so the zoning district decides the limit.

Seaside Structure Height Limits by Zone

Some Restrictions

Seaside Zoning Ordinance § 3.025(6)

Section 3.025 Standards. ... In the R-1 Zone the following standards shall apply: ... 6. Height Restriction: Maximum height of a structure shall not exceed 35 feet.

Lot Coverage Limits

In Seaside's R-1 low density zone, the area covered by a permitted structure and accessory buildings cannot exceed 35 percent of the total lot area. Zoning Ordinance 83-10 sets 40 percent in R-2, 55 percent in R-3, and no requirement in the C-1, C-2 and C-3 commercial zones.

Seaside R-1 Maximum Lot Coverage Rules

Some Restrictions

Seaside Zoning Ordinance § 3.025(7)

Section 3.025 Standards. ... In the R-1 Zone the following standards shall apply: ... 7. Lot Coverage: Maximum area that may be covered by a permitted structure and accessory buildings shall not exceed 35 percent of the total area of the lot.