Sign Regulations in Taylorsville, UT (2026)
5 verified sign regulations for Taylorsville, Utah, sourced directly from the municipal code and official government pages.
Verified from official government sources
Political Signs
Political and other noncommercial message signs, including candidate and ballot-measure signs, need no permit in Taylorsville but are capped at 64 square feet per sign and 128 square feet total per property, with a maximum height of 8 feet if freestanding. They also can't sit within 150 feet of any official voting station building.
Taylorsville Political / Campaign Sign Rules
Some RestrictionsTaylorsville City Code § 13.26.100(C)(6)(a)-(b)
a. Any one sign shall not exceed sixty four (64) square feet in aggregate area on an individual sign and one hundred twenty eight (128) cumulative square feet for all signs on the property and, if freestanding, shall not exceed eight feet (8') in height. Such signs shall not be erected in a manner as to constitute a roof sign. Signs may not be placed on public property, in a public right of w...
Holiday Displays
Taylorsville treats seasonal holiday decorations as a temporary sign exempt from a permit, but the display can't overstay its holiday: the city requires removal within ten calendar days after the holiday ends. Displays must also avoid confusing drivers with authorized traffic signals and meet traffic safety standards.
Taylorsville Holiday Display Removal Deadline
Light RestrictionsTaylorsville City Code § 13.26.100(C)(4)
4. Holiday Decorations: Holiday decorations include noncommercial displays of a primarily decorative nature, clearly incidental, customary, and commonly associated with any national, local, or religious holidays. ... They must be placed so as to avoid confusion with authorized traffic lights and signals and shall conform to traffic safety standards. They shall be removed within ten (10) calenda...
Digital Billboards
Taylorsville allows electronic message center (EMC) signs on permanent pylon and monument signs but caps brightness at one foot-candle at the property line and bans flashing or strobing images. Converting an existing static sign to an EMC requires a conditional use permit from the planning commission plus a building permit, and the EMC portion cannot exceed 65% of the total sign copy area.
Taylorsville Electronic Message Center Sign Rules
Some RestrictionsTaylorsville City Code § 13.26.050(F), (G)
F. Electronic Message Center Signs: Persons installing or manufacturing a sign which has an LED or electronic message center must demonstrate that the brightness of such sign will not exceed one foot-candle along the property line as measured six feet (6') above curb grade. Such signs must also be equipped with a dimmer switch to change the intensity of light emitted from the sign to meet the...
Window Signs
Window signs in Taylorsville's nonresidential zones are limited to ground floor tenants and can't cover more than 25% of any single window or 25% of a group of windows combined. Total window signage is also capped at 64 cumulative square feet, and window signs plus wall signs together can't exceed 20% of the tenant's exterior wall area.
Taylorsville Window Sign Coverage Limits
Some RestrictionsTaylorsville City Code § 13.26.100(E)(3)
3. Window Signs: ... Window signs are allowed for ground floor tenants only. They shall not be located as to block clear view of exits or entrances or to create a safety hazard. The following shall also apply: a. They shall not cover more than twenty five percent (25%) of any single window, twenty five percent (25%) of the entire surface area of a group of windows. ... ... b. They shall not exc...
Freeway-Facing Signs
Only one freeway oriented pylon sign is allowed per parcel with at least 500 linear feet of frontage on Interstate 215, and the Planning Commission must approve it as a nonadministrative conditional use. Signs top out at 950 square feet and 35 feet above the nearest travel lane, with electronic message center panels capped at 25 feet high.
Taylorsville Freeway-Oriented Pylon Sign Rules
Significant RestrictionsTaylorsville City Code § 13.26.090(A)(11)
11. Pylon Signs (Freeway Oriented): a. General Provisions: (1) The planning commission may approve as a nonadministrative conditional use one freeway oriented pylon sign for parcels that have a minimum of five hundred (500) linear feet of frontage adjacent to and/or fronting Interstate 215. ... b. Area: ... (1) Three hundred fifty (350) square feet plus one-half (0.5) square foot for each l...
Looking for Salt Lake County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Taylorsville city rules.
Sign Regulations in Salt Lake County →